WARNING: This product contains nicotine. Nicotine is an addictive chemical.
All our vape juice is fully customizable · Try 5 flavors in a sample pack → About UsSign in
Aspire Triton RTA System – Rebuildable Deck Kit for the Triton Tank
Clearance

Aspire

Aspire Triton RTA System – Rebuildable Deck Kit for the Triton Tank

$2.95

Aspire's Triton RTA System turns an original Triton tank into a rebuildable tank, where you build your own coil. It's a single-coil deck in a tin, and it comes with a pre-built coil, cotton and spares. Clearance.

  • Turns an original Triton into an RTA
  • Pre-built coil, cotton & spares in the tin
  • Pick your own wire and resistance

Limit 3 per order. Need more? Request a larger quantity.

  • SKU: CLR-ASPIRE-TRITON-RTA-SYSTEM
  • Availability: In stock
  • Shipping: Calculated at checkout · Age verification required
Fits
Original Aspire Triton
Type
Rebuildable deck
Deck
Single coil
Resistance
Your build
Material
Stainless steel
Sold as
Kit in a tin

The Aspire Triton RTA System is Aspire's rebuildable deck for the original Triton tank, and it turns the Triton into an RTA. RTA stands for rebuildable tank atomizer. Basically, it's a tank where you build your own coil instead of buying ready-made ones. The kit takes the place of the Triton's coil head. You wrap your own wire, pick your own resistance and put in fresh cotton whenever you want. Some stores call it the Triton RBA (rebuildable atomizer), and it's the exact same kit.

Everything comes in a metal tin, with a pre-built coil to get you started. It only fits the original Aspire Triton tank. Aspire has discontinued it, so this is clearance stock, and once we sell out, we won't be able to get any more.

  • Turns an original Aspire Triton tank into a rebuildable tank (RTA)
  • A simple single-coil deck that works well for mouth-to-lung, or MTL (a tighter draw, like a cigarette), and for moderate-power builds
  • Comes with a pre-built coil, organic cotton, a small screwdriver and spare O-rings, screws and insulator
  • Build it with the wire that you like, and pick your own resistance
  • It doesn't fit the Triton 2. For ready-made coil heads, see our Aspire Atlantis coils
  • Clearance: Aspire discontinued it, stock is limited, and there's no restock

What's in the Tin

  • 1 × Aspire Triton RTA head in three sections (upper, middle and lower)
  • 1 × pre-built coil
  • Organic cotton for wicking
  • 1 × small flat-head screwdriver
  • Spare O-rings, post screws and insulator
  • Metal storage tin

Triton RTA Specs & Features

SpecAspire Triton RTA System
FitsOriginal Aspire Triton tank
Not forAspire Triton 2, Atlantis tanks or other brands
TypeRebuildable head that replaces the coil head
DeckSingle coil, screw-down posts
ResistanceSet by your build (sub-ohm (coils under 1 ohm, for bigger clouds) or above-ohm)
WireYour choice; kanthal is the easiest place to start
MaterialStainless steel
StatusDiscontinued by Aspire; clearance stock

Will It Work With My Tank?

  • Aspire Triton (the original Triton tank)
  • Aspire Triton 2
  • Aspire Atlantis, Atlantis 2, Atlantis Mega or Atlantis EVO
  • Any non-Aspire tank

Not sure which Triton you have? The Triton 2 has dual cyclops airflow slots and a 3ml section. If that's the one you have, stick with Atlantis/Triton coil heads.

Choosing a Triton RTA Build

BuildDrawNotes
1.0–1.5Ω kanthal, about 2.5mm inner diameterMouth-to-lungLow power, and easy on your battery and e-liquid
0.5–0.8Ω kanthal or stainlessRestricted lungModerate power, and it works well in this deck
Under 0.5ΩDirect lungPossible, but this small single-coil deck can have a hard time keeping the cotton wet at high power

Restricted lung is in between MTL and direct lung, and direct lung means the vapor goes straight to your lungs. Always check your build's resistance on the mod before you fire it, and stay inside your battery's amp limit (the most current it can safely handle). If your mod takes 18650 batteries, please read our battery safety guide first, and see our Samsung 25R battery guide.

Best Vape Juice for the Triton RTA

50/50 freebase, 6–18mgGreat Wicks easily in the small deck; 6 to 18mg on an MTL build, 6 to 12mg on a restricted-lung build
MAX VG (vegetable glycerin, for vapor) freebase, 3–6mgGood Fine on a looser, direct-lung build under 0.5Ω
Nicotine saltFair Can be used on a high-resistance MTL build at low power, but a pod system suits salts better

Freebase is the regular kind of nicotine. On an MTL build, we suggest 6 to 18mg, and on a restricted-lung build, 6 to 12mg. When in doubt, 50/50 is usually a great option in this little deck. On a direct-lung build under 0.5 ohm, we always like to suggest 3 to 6mg, in 50/50 or MAX VG. You can also try our nicotine salts on a low-power MTL build. That's the smoother kind of nicotine made for higher strengths, but it really works better in a pod system. We mix every bottle of our freebase vape juice by hand after you order it, so you get the exact strength that you want. Not sure which flavor to get? A 5 flavor sample pack lets you try a few before you invest in a bigger bottle.

Custom Blend Tip: Don't pack the cotton in too tight when you wick it. Tuck the cotton ends lightly into the wicking ports, and make sure they reach. If the cotton's too tight, you'll get dry, burnt-tasting drags, and if it's too thin, it'll leak.

How to Build the Triton RTA

  1. Unscrew the RTA head into its three sections so you can get to the deck, which is the part where the coil sits.
  2. Wrap your coil, or use the pre-built one. Seat the leads (the two ends of the wire) under the post screws, and tighten them down with the included screwdriver.
  3. Trim the leads and check the resistance on your mod. Then fire it in short taps at low power, which is called pulsing, until the coil glows evenly from the center out.
  4. Thread organic cotton through the coil and trim it. Tuck the ends lightly into the wicking ports, the holes that feed juice to the cotton, and don't pack them in tight.
  5. Soak the cotton with vape juice and put the head back together. Screw it into the Triton base where the coil head used to go, and then fill the tank.

Triton RTA Reviews

  • Value: Wire and cotton only cost a few cents, and they take the place of a whole pack of coils.
  • Learning: It's a simple deck, and it's an easy way to learn how to build your own coils.
  • Flavor: It does best on MTL and moderate builds, and it isn't made to be a high-power cloud deck.
  • Watch out for: The small deck takes some practice, and some people find it a little fiddly compared to a full-size RTA.

Triton RTA Troubleshooting

  • Dry puffs: A dry puff is a harsh, burnt-tasting drag. On this deck, it usually means the cotton is too tight or the ends are cut too short. Rewick it a little looser, and make sure the ends reach the ports.
  • Leaking or gurgling: The cotton is too thin. Use a slightly fuller wick so it seals the ports.
  • Resistance jumps around: Retighten the post screws, and check that the insulator is seated.
  • Hot spots: Those are spots on the coil that glow brighter than the rest. Pulse the coil and gently squeeze the wraps together until it glows evenly.

Questions & Answers

What does the Aspire Triton RTA System fit?

Only the original Aspire Triton tank. It doesn't fit the Triton 2 or any of the Atlantis tanks.

Is the Triton RTA the same as the Triton RBA?

Yes. Stores use both names for Aspire's rebuildable deck kit for the Triton, and it's the same kit.

What comes in the Triton RTA tin?

The three-part RTA head, a pre-built coil, organic cotton, a small screwdriver and spare O-rings, screws and insulator.

What resistance should I build on the Triton RTA?

For mouth-to-lung, we suggest around 1.0–1.5Ω, or 0.5–0.8Ω for a restricted-lung draw, which is in between MTL and direct lung. This small single-coil deck works best at moderate power.

What wire should I use?

Kanthal is the easiest wire to start with, and it works in wattage mode. Stainless steel works too, and it can also run in temperature control on mods that have it.

Can I still use normal coils after installing the RTA?

Yes. Just unscrew the RTA head and screw a stock Triton or Atlantis coil head back in.

How often should I rewick it?

Whenever the flavor fades or gets a little muted. For a lot of vapers, that's every week or two, but it all depends on how much you use it. Rewicking only takes a few minutes, and it costs next to nothing.

Will you restock the Triton RTA?

No. Aspire has discontinued it, so this is clearance stock, and when it's gone, we won't be getting any more.

For use by adults 21+.

Customer Reviews

We just relaunched our website, so our reviews got a fresh start too. Own one of these? We'd love for you to be one of the first to share your thoughts!

Contact Us