
Joyetech
Joyetech Cubis QCS Coils 0.25Ω NotchCoil (5-Pack)
$4.95
Joyetech QCS 0.25Ω SS316 NotchCoil heads for the Cubis and Cubis Pro, rated 30–55W. You can rewick the cotton and keep the head. 5 per pack, clearance stock.
- Rewick the cotton, keep the coil
- 0.25Ω SS316 NotchCoil, rated 30–55W
- Fits Cubis and Cubis Pro tanks
Limit 5 per order. Need more? Request a larger quantity.
- Resistance
- 0.25Ω
- Wattage
- 30–55W
- Wire
- SS316 NotchCoil
- Wick
- Organic cotton, replaceable
- Fits
- Cubis, Cubis Pro
- Sold as
- Pack of 5
Joyetech Cubis QCS Coils 0.25Ω are the Quick Change System heads for Joyetech's Cubis and Cubis Pro tanks. Each one has a 0.25Ω NotchCoil inside, which is a stainless steel (SS316) tube with little notches cut into it, and it's rated 30–55W. What makes these Cubis coils different is that you can rewick them. When the cotton wears out, you pull it out, put in fresh cotton and keep the same head, so one coil can last through several rewicks. Joyetech doesn't make these anymore, so this is clearance stock, and we won't be able to restock them.
- Genuine Joyetech QCS 0.25Ω heads, 5 per pack
- SS316 NotchCoil element, rated 30–55W
- Quick Change System, so you can swap out the cotton and keep the coil
- Runs in wattage mode, or in SS316 temperature control on a mod that supports it
- Fits the Joyetech Cubis and Cubis Pro tanks
- Clearance stock. Joyetech discontinued them, so when they're gone, we can't get more
What's in the Box
- 5 × Joyetech QCS 0.25Ω NotchCoil heads
- Cotton for rewicking isn't included
Cubis QCS Coil Specs & Features
| Spec | Joyetech Cubis QCS 0.25Ω |
|---|---|
| Resistance | 0.25Ω |
| Wattage | 30–55W |
| Element | NotchCoil (notched SS316 tube) |
| Wick | Organic cotton, replaceable (QCS) |
| Modes | Wattage (VW), or TC-SS316 where your mod offers it |
| Draw | Direct lung |
| Fits | Joyetech Cubis and Cubis Pro |
| Status | Discontinued by Joyetech; clearance stock |
Cubis Coil Wattage
Joyetech rates the QCS 0.25Ω at 30–55W. Toward the bottom of that range, you'll get a cooler vape with a little more flavor. When you turn it up, the vapor gets warmer and thicker, but it'll also go through your vape juice faster.
Cubis Coils Compatibility: Will It Fit?
- Joyetech Cubis tank
- Joyetech Cubis Pro tank
- Joyetech eGo AIO and AIO ProBox (sellers warn the 0.25Ω NotchCoil isn't suitable there)
- Joyetech eGo ONE tanks (use CL heads such as our CL Pure Cotton 0.5Ω)
- Any non-Joyetech tank
Have a Cuboid Mini or another Joyetech device that takes BF coils? Please check your manual before you order, because the Cubis and Cubis Pro are the only confirmed fits that we list.
Temperature Control With the SS316 NotchCoil
The NotchCoil is stainless steel (SS316), so it works two different ways. In regular wattage mode, it'll fire on any 510 mod (510 is the standard screw-on thread that most tanks use). If your mod has SS316 temperature control (TC), it works in that mode too. In TC, set the mode to SS316, and lock in the resistance while the coil is still cold. If all of that sounds confusing, that's OK. Wattage mode at 30–55W is really all you need.
Custom Blend Tip: If you rewick, only dry-fire the head (fire it with no cotton in it) in wattage mode, and never in temperature control. Don't pack the new cotton in too tight either, or you'll get a burnt taste.
Best Vape Juice for Cubis QCS Coils
This is a sub-ohm coil (under 1 ohm, made for bigger clouds), so we'd recommend freebase vape juice, which is the regular kind of nicotine. We always like to suggest 3 to 6mg. MAX VG works best in this coil and gives you the thickest clouds, and you can use 50/50 if you keep the watts on the lower side. 50/50 has a little more throat hit, that catch you feel in your throat. Nic salt, the smoother nicotine made for pod kits, is way too strong for a coil like this. We mix every bottle of Custom Blend Vape Juice by hand when you order it, and you pick the nicotine strength and the PG/VG ratio. PG carries the flavor, and VG is the thick part that makes the vapor. If you'd like to try a few flavors first, our e-liquid sample pack gets you five 15ml bottles.
How to Change & Prime a Cubis Coil
- Empty the Cubis tank, and then unscrew the base from the glass.
- Unscrew the old QCS head, and screw the new one in until it's finger-tight.
- Prime it. Drip 3–4 drops of vape juice into the top of the coil and onto the cotton that you can see in the wicking holes.
- Put the tank back together, fill it and give the cotton at least 10 minutes to soak. The longer, the better, and letting it sit an hour or more is ideal.
- Start around 35W, take a few drags, and then slowly turn it up from there.
How to Rewick a QCS Coil
- Take the head out of the tank and let it cool down.
- Open the head and pull out the old cotton. The NotchCoil stays right where it is.
- If there's any residue, rinse the head and let it dry completely. Then dry-fire it briefly, with no cotton in it, to burn off the gunk. Only do that in wattage mode, never in TC.
- Thread a fresh piece of organic cotton through the coil, and trim it so the ends sit over the wicking holes. Then close the head back up.
- Prime it with vape juice, and let it soak for a while before you vape on it.
Troubleshooting & Time for a New Coil
- Burnt taste after a rewick: the new cotton wasn't fully soaked, or it's packed in too tight. Loosen it up a little bit and prime it again.
- Gurgling or leaking: the cotton's too loose. Use a little more cotton so it seals off the wicking holes.
- Resistance reads wrong: make sure the head is screwed all the way into the base and that the 510 pin is clean.
- Time for a rewick: the vapor starts dropping off, and the flavor gets a little muted.
- Time to replace the whole head: the NotchCoil looks warped or discolored, and a fresh rewick doesn't bring the flavor back.
Questions & Answers
What tanks do Joyetech Cubis QCS coils fit?
They fit the Joyetech Cubis and Cubis Pro. They aren't suitable for the eGo AIO, and they won't fit eGo ONE tanks either.
What wattage is the Cubis QCS 0.25Ω coil?
Joyetech rates it 30–55W. We recommend starting around 35W and adjusting it from there until it tastes right to you.
What does QCS mean on a Joyetech coil?
It stands for Quick Change System. The head opens up, so you can replace the cotton and keep the coil, and that makes each head last a lot longer.
What is a NotchCoil?
It's Joyetech's stainless steel tube with notches cut into it, and it's used in place of a regular wound wire. It heats up very quickly and evenly.
Can I use temperature control with this coil?
Yes. The element is SS316, so it runs in SS316 TC mode on mods that have it, and it also runs in regular wattage mode.
Are Cubis Pro coils the same as Cubis coils?
Yes. Both tanks take the same Joyetech heads, so these QCS heads fit either one.
Is cotton included for rewicking?
No, the pack is just the five coil heads. Any organic vape cotton will work for a rewick, though.
Can I use nicotine salt with Cubis coils?
We don't recommend it. At 30–55W, salt nicotine is way too strong. We'd recommend freebase at 3 to 6mg instead.
Will you restock these?
No. Joyetech discontinued the QCS 0.25Ω, so this is clearance stock. When it sells out, that's it.
For use by adults 21+.
| Resistance | 0.25Ω, SS316 NotchCoil |
|---|---|
| Wattage | 30–55W |
| Modes | Wattage or temperature control (SS316) |
| Fits | Joyetech Cubis and Cubis Pro |
| Feature | QCS (Quick Change System): replace the cotton and keep the head |
| Sold as | Pack of 5 |
| In the box | 5 × Joyetech QCS 0.25Ω coil heads |
See our Shipping Policy and Returns.
You May Also Like
Customer Reviews
We just relaunched our website, so our reviews got a fresh start too. Own one of these? We'd love for you to be one of the first to share your thoughts!




