WARNING: This product contains nicotine. Nicotine is an addictive chemical.
All our vape juice is fully customizable · Try 5 flavors in a sample pack → About UsSign in
Vaporesso Armour Max 220W Starter Kit

Vaporesso

Vaporesso Armour Max 220W Starter Kit

$61.95

The Vaporesso Armour Max kit is a tough 220W dual-21700 mod (18650 sleeves included) with a TPU armour shell and a Uni-Lock fire button, and it comes with the iTank T and GTi mesh coils.

  • Up to 220W from two 21700s or 18650s
  • TPU armour shell soaks up drops
  • Uni-Lock fire button for pocket carry

Limit 3 per order. Need more? Request a larger quantity.

  • SKU: MOD-VAPORESSO-ARMOUR-MAX-KIT
  • Availability: In stock
  • Shipping: Calculated at checkout · Age verification required
Capacity
6ml
Output
5–220W
Batteries
2 × 21700 or 18650
Chip
AXON
Screen
0.96" TFT
Tank
iTank T

The Vaporesso Armour Max 220W Starter Kit comes with everything but the batteries. You get the Armour Max mod, a tank and two GTi mesh coils, so it's ready to fill. The Vaporesso Armour Max runs on two big 21700 batteries for long days between charges, or you can use two 18650s with the sleeves that come in the box. It puts out up to 220W from the AXON chip, and it's made for cloud chasers, the folks who love big, thick clouds.

The whole thing is wrapped in a rubbery TPU shell that protects it from drops and bumps, and one Uni-Lock button both fires it and locks it. The battery door also opens with one press, so swapping batteries is quick.

  • Up to 220W from two 21700 batteries, or two 18650s with the included sleeves (batteries sold separately)
  • Full-body TPU armour over a zinc-alloy frame, plus a TPU protector on the tank glass
  • The Uni-Lock fire button slides to lock, so it won't fire in your pocket
  • Wattage, Pulse, F(t), ECO and temperature control (SS, Ni, Ti) modes
  • One-press battery door, so you don't need a coin or a tool to open it
  • Comes with the iTank T and two GTi mesh coils (0.2Ω and 0.4Ω)

What's in the Box

  • 1 × Vaporesso Armour Max mod
  • 1 × iTank T with a protective cover fitted (earlier batches shipped with the iTank 2 instead; both use GTi coils)
  • 1 × GTi 0.2Ω mesh coil (installed) and 1 × GTi 0.4Ω mesh coil
  • 1 × spare glass tube, spare O-rings and a silicone refill plug
  • 2 × 18650 sleeves (inside the mod) and a USB-C cable
  • Batteries are not included, so you'll need two 21700s or two 18650s

Vaporesso Armour Max Specs & Features

SpecVaporesso Armour Max Kit
Output5–220W
Batteries2 × 21700, or 2 × 18650 with the included sleeves, sold separately
ChipAXON
ModesWattage, Pulse (steady output as the batteries drain), F(t) custom curve, ECO, TC-SS, TC-Ni, TC-Ti
Screen0.96" color TFT
BuildZinc alloy frame with full-body TPU armour
SafetyUni-Lock fire button with a built-in lock slider
ChargingUSB-C, 5V/2A
SizeAbout 157 × 56.5 × 34mm; about 186g without batteries
TankiTank T, 510 thread, top fill, takes all GTi coils
ColorsVaries with stock
Also listed asVaporesso Armour Max 220W kit, Armour Max 220 starter kit, Vaporesso Armour Max with iTank T

Greg's Tip: Running a mod that takes removable 18650, 20700 or 21700 batteries? Always keep a charged spare on you (a full set if it takes two), so a dead battery doesn't leave you out of luck. Some mods let you vape while they charge, called pass-through. But plenty don't. For 18650s, the Samsung 25R is the workhorse of the vaping industry. And never carry a loose battery in a pocket or purse. Use a battery case. Our 18650 battery safety guide covers the rest.

Greg's Tip: Always keep a spare glass for your tank. If the glass breaks and you don't have one, you're out of luck. And if it does break, put the whole tank in a Ziploc bag right away so you don't lose any O-rings. Then check the O-rings for nicks before you put it back together. Need one? Check our replacement glass.

Armour Max Tank: iTank T (and iTank 2)

Current Armour Max kits come with the Vaporesso iTank T. It's a 510 sub-ohm tank, which means it screws onto the standard 510 thread and runs coils under 1 ohm that are made for bigger clouds. It fills from the top, and there's a TPU protector over the glass. The first Armour Max kits came with the 8ml iTank 2 instead. Both tanks use the same GTi coils, so the coil and juice advice below works either way. For a second tank, the Vaporesso iTank 2 and the original iTank both fit the Armour Max, and they take GTi coils too.

Vaporesso Armour Max Coils (GTi Mesh)

The Armour Max uses Vaporesso GTi mesh coils. The 0.2Ω comes installed, and that's the one for big clouds. The 0.4Ω in the box runs a little bit cooler, with more flavor. GTi coils also come in 0.15Ω and 0.5Ω. With a new coil, start at the low end of its range, take a few drags and then slowly work your way up.

GTi 0.15Ω MeshIn stock
75–90WMost vapor
GTi 0.2Ω MeshIn stock
60–75WInstalled in the kit
GTi 0.4Ω MeshIn stock
50–60WIn the box, more flavor
GTi 0.5Ω MeshIn stock
30–40WLower power, longer battery

We sell Vaporesso GTi coils by the pack, and we always suggest keeping a spare coil or two around. If you only need one, please fill out our Single Coil form, and we'll see what we can do.

Armour Max Battery Guide

The Armour Max takes two 21700 batteries, or two 18650s in the sleeves that come inside the mod, and the 21700s last noticeably longer. Use a matched pair of high-drain batteries (made for high power), and always charge and replace them together. Put them in the way the battery bay shows. For 18650s, a pair of Samsung 25R batteries works well at everyday wattages.

Never, ever carry a naked battery (one without a case) in your pocket or purse, especially with keys or coins. And before you put any batteries in, you must read our 18650 battery safety guide.

Custom Blend Tip: That TPU shell handles drops and bumps very well, but it doesn't have a water rating, so if you're working outside, keep it out of the rain. And for longer days between charges, we recommend 21700s over 18650s.

Will It Work With My Device?

  • Any 510 sub-ohm tank up to about 30mm wide
  • Vaporesso GTi coils (0.15Ω, 0.2Ω, 0.4Ω, 0.5Ω)
  • 21700 or 18650 batteries in matched pairs
  • Vaporesso GTX or XROS pods (different system)
  • Built-in-battery pod system parts
  • Mismatched or single batteries: it needs two cells to fire

Best Vape Juice for the Armour Max Kit

MAX VG freebase, 3–6mgGreat Thick, smooth clouds at 50–90W on GTi mesh
50/50 freebase, 3–6mgGood Usually fine at lower wattage, but it can flood or spit through low-ohm mesh coils
Nicotine saltAvoid Far too strong at sub-ohm wattages

Thicker juice works best on these GTi mesh coils, so we'd recommend MAX VG in our freebase vape juice. VG, or vegetable glycerin, is the thick part that makes the vapor, and MAX VG is very thick and produces tons of vapor. 50/50 usually does fine too, as long as you keep the wattage on the low side. Freebase is just the regular kind of nicotine, and we always like to suggest 3 to 6mg. Nic salt is made for low-wattage pod kits, and we don't recommend it in a kit like this. We mix each bottle of Custom Blend Vape Juice by hand, in the exact nicotine strength that you want. Our vape juice sampler pack gets you five different flavors, so you can find a few that you love.

How to Use the Vaporesso Armour Max

  1. Press the battery door button, put in two charged 21700s (or 18650s in the sleeves) the way they're marked, and close the door.
  2. Click the fire button 5 times to turn it on.
  3. Fill the tank, and then wait at least 10 minutes so the new coil can soak. The longer, the better.
  4. Set the wattage with the up and down buttons. On the 0.2Ω coil, start around 60W, take a few drags and work your way up from there.
  5. Before it goes in your pocket or bag, slide the Uni-Lock on the fire button to lock it.

Vaporesso Armour Max Reviews

  • Toughness: the rubbery TPU shell soaks up drops and bumps, and reviewers say it feels built for job sites and the outdoors.
  • Battery life: two 21700s can run for days of normal vaping, but that all depends on how much you vape.
  • Uni-Lock: one button fires it and locks it, which is simple and safe in a pocket.
  • Look out for: it's big and heavy with two 21700s in it. It also has no IP water rating, so keep it out of the rain.

Armour Max Reviews From Experts

Published reviews from independent vape review sites, summarized in our own words. These aren't Custom Blend customer reviews and aren't counted in our star rating.

Rated 9.7 / 10

Neil · Oct 2023

Called the Armour Max a true workhorse with instant ramp-up, consistent output and standout flavor in F(t) mode, paired with GTi coils that rank with the best; highly recommended for sub-ohm vapers.

Liked: solid, durable and good-looking; easy lock built into the fire button; instant ramp-up and steady output; quick-release battery door

Watch for: can guzzle juice at higher power; USB port isn't covered; lock slider felt a bit loose

Rated 9 / 10

Si · Oct 2023

Loved it from start to finish and ranked it among his all-time favorites: a chunky, rugged kit with Vaporesso's excellent AXON chip and an improved iTank, getting about two days of heavy use from 21700s.

Liked: takes dual 21700s (or 18650s); superb GTi coil flavor and lifespan; rugged, futuristic styling; functions for new and advanced vapers

Watch for: bulky styling won't suit everyone

Rated 4.5 / 5

Anthony · Oct 2023

Gave it a full recommendation as a durable dual-battery mod for advanced vapers, with good tested power and temperature control, plus a bundled tank that's genuinely good, which is rare in kits.

Liked: great build and durability; accurate wattage (over 208W tested) and 39A limit; good temperature control; lock slider on the fire button

Watch for: no watt-curve option; power mode names could be clearer; temperature control capped at 80W

Questions & Answers

Does the Vaporesso Armour Max come with batteries?

No. It takes two 21700s or two 18650s (the sleeves are included), and the batteries are sold separately.

What coils does the Vaporesso Armour Max use?

It uses Vaporesso GTi mesh coils. The kit comes with a 0.2Ω and a 0.4Ω, and the 0.15Ω and 0.5Ω fit too.

What tank comes with the Armour Max kit?

The iTank T. Early kits came with the 8ml iTank 2, and both take GTi coils.

Can I use 18650 batteries in the Armour Max?

Yes. Two 18650 sleeves come inside the mod. 21700s just last longer.

Is the Vaporesso Armour Max waterproof?

No. The TPU armour makes it shock-resistant, but it doesn't have an IP water rating.

How do I lock the Armour Max?

Slide the Uni-Lock on the fire button. It won't fire again until you slide it back.

Can I buy just the Armour Max mod?

Yes. If you already have a tank, take a look at the Vaporesso Armour Max box mod (mod only).

What wattage should I use with the Armour Max coils?

Run the 0.2Ω GTi coil at 60–75W and the 0.4Ω at 50–60W. On a fresh coil, start at the low end and work your way up.

Can I charge the Armour Max with USB-C?

Yes, at 2A. An external charger is gentler on the batteries, though, and it's faster with two 21700s. Never charge your vape unattended. You always want to be awake and nearby.

For use by adults 21+.

Customer Reviews

We just relaunched our website, so our reviews got a fresh start too. Own one of these? We'd love for you to be one of the first to share your thoughts!

Contact Us