
Vaporesso
Vaporesso GTX Replacement Coils (GTX Mesh Coils)
$10.95
Vaporesso GTX mesh coils in 0.15Ω, 0.2Ω, 0.3Ω, 0.6Ω and 0.8Ω, sold by the pack. They fit the Armour GS, the LUXE PM40 (0.6Ω and 0.8Ω only) and other GTX devices.
- Five mesh resistances, 0.15Ω to 0.8Ω
- Push-in coils, no threads
- Fits the Armour GS and LUXE PM40
Step 1 of 1: choose Resistance to continue
Limit 5 per order. Need more? Request a larger quantity.
- Resistances
- 0.15Ω – 0.8Ω
- Wattage
- 12–75W
- Coil type
- Mesh
- Fitting
- Push-in
- Draw style
- Restricted lung to direct lung
- Sold as
- By the pack
Vaporesso GTX Replacement Coils are the push-in mesh coils for Vaporesso's GTX platform, and this one family of coils has a really wide range. The 0.8Ω gives you a cool restricted-lung draw, which is in between MTL (mouth-to-lung, a tight draw like a cigarette) and direct lung. It's a little looser than a cigarette. On the other end, the 0.15Ω makes big direct-lung clouds, where the vapor goes straight to your lungs.
Vaporesso GTX coils fit the Armour GS pod mod (a pod kit with a screen and adjustable power) and the LUXE PM40 cartridge. They also fit older GTX devices like the Target PM80. We stock five GTX mesh coils, the 0.15Ω, 0.2Ω, 0.3Ω, 0.6Ω and 0.8Ω, and we sell them by the pack.
- Five GTX mesh resistances in stock, from the 0.8Ω (12–20W) up to the 0.15Ω (60–75W)
- Push-in fitting, so you just pull the old coil out and press the new one in. There are no threads
- Fits every pod of the Vaporesso Armour GS, including the 0.15Ω and 0.3Ω that it comes with
- The 0.6Ω and 0.8Ω are the ones that work in the 40W LUXE PM40 cartridge
- These aren't GTi coils. GTi coils are for the iTank family and the Armour Max/S/Ultra/Octa kits
What You Get
- Vaporesso GTX mesh coils by the pack, in the resistance that you pick
- Coils only. The pods, tanks and devices are sold separately
Vaporesso GTX Coil Specs
| Spec | Vaporesso GTX Coils |
|---|---|
| Resistances we stock | 0.15Ω, 0.2Ω, 0.3Ω, 0.6Ω and 0.8Ω mesh |
| Wattage | 0.8Ω 12–20W · 0.6Ω 20–30W · 0.3Ω 32–45W · 0.2Ω 45–60W · 0.15Ω 60–75W |
| Heating element | Mesh |
| Fitting | Push-in, no threads |
| Platform | Vaporesso GTX (not GTi, not XROS) |
| Sold as | By the pack |
GTX Coils: Resistance & Wattage
Pick your GTX coil by the kind of draw that you like. The 0.8Ω and 0.6Ω give you a tighter, cooler restricted-lung draw, and they go easy on your vape juice too. The 0.3Ω, 0.2Ω and 0.15Ω open up for direct-lung clouds, but they use more battery and more juice.
Vaporesso also makes GTX 0.4Ω and 1.2Ω coils, plus dual mesh versions of the 0.15Ω, 0.2Ω and 0.3Ω. We don't carry those yet, but please request them, and we'll do our best.
Will GTX Coils Work With My Device?
- Vaporesso Armour GS and Armour G (all five resistances)
- Vaporesso LUXE PM40 (0.6Ω and 0.8Ω only, as it tops out at 40W)
- Vaporesso Target PM80 / PM80 SE, Target PM30, LUXE 80 / 80S and GTX Go 80
- GEN PT60 and GEN PT80S, and other GTX-platform pods and tanks
- GTi-coil tanks: the iTank, iTank 2 and iTank T take GTi coils
- Vaporesso XROS kits have the coil built into the pod, so they use XROS pods
- Low-power GTX devices (GTX One, GTX Go 40) can't run the 0.15Ω or 0.2Ω
- Other brands' coils and pods
Just make sure the lowest wattage on the coil is below your device's max. The 40W LUXE PM40 runs the 0.6Ω and 0.8Ω, and the 80W Armour GS runs all five.
Best Vape Juice for GTX Coils
The 0.15Ω, 0.2Ω and 0.3Ω run at higher watts for bigger clouds, so in those we recommend freebase vape juice, which is the regular kind of nicotine. We always like to suggest 3 to 6mg. MAX VG works best in these three, since VG (vegetable glycerin) is the thick part of the juice that makes the vapor. 50/50 works too, as long as you keep them toward the low end of their watts.
The 0.6Ω and 0.8Ω are a different story. They run at low power, and nicotine salt e-juice is the normal match for them. Nic salt is the smoother kind of nicotine made for pod kits. The 0.6Ω is the middle ground for salt nicotine, and the 0.8Ω gives you a little tighter draw. Most people start around 24 to 40mg. If you're coming off of a disposable vape, those are usually 50mg, so that's where we'd recommend you start. If you'd rather use freebase in these two, 50/50 is usually a great option when in doubt.
Every one of our flavors comes either way, and we mix each bottle by hand to the exact strength that you pick. A 5 flavor sample pack lets you try five of them before you invest in a bigger bottle.
Custom Blend Tip: Check the max wattage on your device before you pick a resistance. The LUXE PM40 tops out at 40W, so we'd stick with the 0.6Ω or the 0.8Ω on that one.
How to Change & Prime a GTX Coil
- Pull the pod out of the device, or empty the tank, and then pull the old GTX coil straight out of the bottom.
- Prime the new coil. Drip 3–4 drops of vape juice into the top and onto the cotton through the side holes.
- Press the new coil firmly into the pod until it seats.
- Fill the pod and let it sit for at least 10 minutes, so the cotton soaks all the way through. The longer, the better.
- Start at the low end of its wattage range, take a few drags and then turn it up until it tastes right to you. The coil will last longer if you do that.
GTX Coils Reviews
- Range: one coil family covers both restricted-lung and direct-lung vaping, so one device can do both.
- Flavor: reviewers really like the flavor out of these mesh heads, especially the 0.3Ω and the 0.6Ω.
- Coil life: Vaporesso rates the direct-lung GTX coils at about 5–6 refills, and the 0.8Ω lasts a little bit longer.
- Keep in mind: older and newer GTX devices take different parts of the range, so match the coil to your device's wattage.
GTX Coil Troubleshooting
- Burnt taste on a new coil: it wasn't primed long enough. Let the next one soak at least 10 minutes, and longer is even better.
- "No atomizer" / "check atomizer": push the coil all the way in and reseat the pod.
- Gurgling or spitting: you're usually running it under the coil's minimum wattage, or the pod is overfilled. Try turning the power up a few watts.
- Weak vapor: the coil is worn out. You'll know when to change it, as the flavor gets a little muted. Most vapers change GTX coils every 1–2 weeks.
Questions & Answers
What devices do Vaporesso GTX coils fit?
They fit Vaporesso's GTX devices. That's the Armour GS, the Armour G and the LUXE PM40 (0.6Ω and 0.8Ω only). They also fit the Target PM80 / PM80 SE, Target PM30, LUXE 80 / 80S, GTX Go 80, GEN PT60 / PT80S and other GTX pods and tanks.
What coils does the Vaporesso Armour GS use?
GTX coils. It comes with the GTX 0.15Ω and 0.3Ω mesh, and the 0.2Ω, 0.6Ω and 0.8Ω that we carry fit it too.
What GTX coils fit the LUXE PM40?
The 0.6Ω (20–30W) and the 0.8Ω (12–20W) mesh. The LUXE PM40 tops out at 40W, and the 0.15Ω, 0.2Ω and 0.3Ω need more power than that.
Which GTX coil should I choose?
We'd recommend the 0.8Ω for a cool restricted-lung draw and the 0.6Ω for a looser one. The 0.3Ω is for warm direct-lung vaping, and the 0.2Ω is a good all-rounder with thick vapor. If you're a cloud chaser (someone who loves big, thick clouds), the 0.15Ω makes the biggest clouds.
Are GTX and GTi coils the same?
No. They're separate Vaporesso platforms with different fittings. GTi coils fit the iTank, iTank 2 and iTank T, and GTX coils fit the Armour GS, LUXE PM40 and other GTX devices.
What wattage is the GTX 0.3 coil?
Vaporesso rates the GTX 0.3Ω mesh at 32–45W. We'd start it around 35W, and then adjust it to taste.
How long do GTX coils last?
Vaporesso rates the direct-lung GTX coils at about 5–6 tank refills, which is usually 1–2 weeks, but it all depends on how much you use them. The 0.8Ω tends to last a little longer.
Can I use nicotine salt in GTX coils?
Yes, in the 0.6Ω and 0.8Ω. Those run at low power, and the 0.6Ω is the middle ground for salt nicotine. Most people start around 24 to 40mg, or 50mg if they're coming off of a disposable. In the 0.15Ω, 0.2Ω and 0.3Ω, we'd recommend freebase at 3 to 6mg instead.
Do you sell GTX coils in packs?
Yes, we sell them by the pack. If you only need one, please fill out our Single Coil form, and we'll see what we can do. If you need more, please request a larger quantity.
For use by adults 21+.
| Compatible with | Vaporesso Armour GS (all five), LUXE PM40 (0.6Ω and 0.8Ω only), Target PM80 and other GTX-coil devices |
|---|---|
| Resistances | 0.8Ω Mesh (12–20W), 0.6Ω Mesh (20–30W), 0.3Ω Mesh (32–45W), 0.2Ω Mesh (45–60W), 0.15Ω Mesh (60–75W) |
| Sold as | By the pack |
| Tip | Drip a few drops of juice on a new coil and give it at least 10 minutes to soak before you vape. |
See our Shipping Policy and Returns.
You May Also Like
Customer Reviews
We just relaunched our website, so our reviews got a fresh start too. Own one of these? We'd love for you to be one of the first to share your thoughts!




