WARNING: This product contains nicotine. Nicotine is an addictive chemical.
All our vape juice is fully customizable · Try 5 flavors in a sample pack → About UsSign in
GeekVape Wenax Q Ultra 30W Pod Kit

GeekVape

GeekVape Wenax Q Ultra 30W Pod Kit

$27.95

The GeekVape Wenax Q Ultra is a slim 30W pod kit that fires when you inhale. It has a 1300mAh battery, a full-length 2.51" touchscreen and refillable Q pods.

  • Up to 30W on a 1300mAh battery
  • 2.51-inch touchscreen down the front
  • Takes every GeekVape Q pod, 0.4Ω to 1.2Ω

Limit 3 per order. Need more? Request a larger quantity.

  • SKU: MOD-GEEKVAPE-WENAX-Q-ULTRA-KIT
  • Availability: In stock
  • Shipping: Calculated at checkout · Age verification required
Output
Up to 30W
Battery
1300mAh built-in
Screen
2.51" touchscreen
Pod
Q pod, 3ml, side fill
Firing
Draw-activated
Charging
USB-C, 2A

The GeekVape Wenax Q Ultra 30W Pod Kit is a slim metal pod kit with a big 2.51-inch touchscreen down the front. It's a pod mod, which is a pod system with a screen and power that you can adjust. That lets you turn the power up a little bit, like after a big meal, without changing the nicotine strength in your juice.

The Wenax Q Ultra fires when you inhale, and it runs up to 30W from a 1300mAh battery. It takes the same refillable GeekVape Q pods as the rest of the Q family. A 0.8Ω pod gives a tight mouth-to-lung (MTL) draw, which feels a lot like a cigarette. A 0.4Ω pod gives a looser restricted-lung draw, which is in between MTL and a wide-open lung draw. You set the wattage by touch, and the screen wakes up when you lift it.

  • Up to 30W from a built-in 1300mAh battery, and you set it on the touchscreen
  • A big 2.51" touchscreen with three display styles, and it wakes up when you lift it
  • It's draw-activated, so there's no button to press. You just inhale
  • The 3ml Q pod fills from the side, and magnets hold it in place
  • Comes with a 0.8Ω pod for MTL and a 0.4Ω pod for a looser, restricted lung draw
  • Takes every GeekVape Q pod, from 0.4Ω to 1.2Ω

What's in the Box

  • 1 × GeekVape Wenax Q Ultra device (1300mAh built-in battery)
  • 1 × Q pod, 0.8Ω, 3ml (pre-installed)
  • 1 × Q pod, 0.4Ω, 3ml (spare)
  • 1 × USB-C charging cable
  • 1 × user manual

Wenax Q Ultra Specs & Features

SpecGeekVape Wenax Q Ultra
OutputUp to 30W, set on the touchscreen
Battery1300mAh, built-in
Screen2.51" touchscreen, three UI styles, wrist-wake
FiringDraw-activated
PodGeekVape Q cartridge, 3ml, side fill, magnetic connection
Resistance range0.4Ω – 1.2Ω (Q pods)
AirflowAdjustable
BodyMetal frame, about 126 × 28 × 28mm
ChargingUSB-C, 2A
ColorsVaries with stock (GeekVape makes it in black, gray, blue, green, gold, silver, orange and purple)
Also listed asGeek Vape Wenax Q Ultra, GeekVape Wenax Q Ultra kit, Wenax Q Ultra 30W

Wenax Q Ultra Pods: Which Resistance?

The Wenax Q Ultra reads the pod, and then it lets you set the wattage within that pod's range. A lower resistance gives a looser, warmer draw with more vapor. A higher one gives a tighter, cooler draw, and that's the kind that suits nicotine salts best. The 0.6Ω pod is the middle ground for salt nicotine (the smoother kind of nicotine made for pod kits).

Q podDrawBest for
1.2Ω (8–12W)Tight mouth-to-lungNicotine salts, longest battery life
0.8Ω (12–14W)Mouth-to-lungA good all-around pod, and it comes installed in the kit
0.6Ω (18–25W)Loose MTLMore flavor and vapor, salts or low-nic freebase
0.4Ω (25–30W)Restricted lungBiggest vapor; included as the spare

We sell GeekVape Q replacement pods by the pack, in all four resistances, and it's a good idea to keep a spare pod or two around.

Will It Work With My Device?

  • GeekVape Q pods (0.4Ω, 0.6Ω, 0.8Ω, 1.2Ω) fit the Wenax Q Ultra
  • The same Q pods fit the Wenax Q Pro, Wenax Q2, Sonder Q2 and Aegis Hero Q
  • GeekVape U pods for the Wenax U and Sonder U (see U pods)
  • GeekVape Aegis / B-series pods
  • Vaporesso XROS pods

Best Vape Juice for the Wenax Q Ultra

Nicotine saltGreat The natural match for the 0.8Ω and 1.2Ω pods at low wattage
50/50 freebaseGreat Works in every Q pod
MAX VG (vegetable glycerin, for vapor) freebaseFair Only in the 0.4Ω pod, since thick juice has a hard time soaking into the tighter pods

For a tight MTL draw on the 0.8Ω or 1.2Ω pod, we'd recommend our nicotine salt e-juice. For a pod kit like this, most people start around 24 to 40mg of salt nicotine. If you're coming off a disposable vape, those are usually 50mg, so that's where we'd recommend you start. On the 0.4Ω pod, try our freebase vape juice, which is the regular kind of nicotine, in a 50/50. When you're not sure, 50/50 is usually a safe bet. We mix every bottle by hand in the exact strength that you pick, and a vape juice sampler pack lets you try five flavors for a low price.

Custom Blend Tip: If it spits or gurgles, try filling it a little lower and closing the airflow a bit, especially on the tighter 0.8Ω and 1.2Ω pods. Wide-open airflow on a tight pod is usually what causes it.

How to Fill and Use the Wenax Q Ultra

  1. Pull the pod straight up out of the top of the device. It's held in by magnets.
  2. Open the silicone plug on the side of the pod and fill it to just below the top. Never overfill it, and then close the plug firmly.
  3. Let a new pod sit for at least 10 minutes, so the cotton can soak up the juice. The longer, the better. Then put it back in.
  4. Wake up the screen and set your wattage by touch. On a new pod, start at the low end of its range and work your way up.
  5. Set the airflow how you like it, and then just inhale to vape.

GeekVape Wenax Q Ultra Reviews

  • Screen: The full-length touchscreen is what reviewers talk about the most. It's bright and easy to read, and changing the wattage is quick.
  • Flavor: Reviewers say the Q pods do what they've always done. The 0.8Ω gives clean MTL flavor, and the 0.4Ω gives fuller vapor.
  • Size: It's slim and fits easily in your pocket, and that's really nice for a 30W device.
  • Keep in mind: It's draw-only, so there's no fire button. At higher wattage, the 1300mAh battery needs a charge every day.

Troubleshooting

  • Burnt taste on a new pod: The cotton didn't soak long enough. Let a new pod sit for at least 10 minutes, and start it at a lower wattage.
  • Not firing: Make sure the pod is seated on the magnets and the contacts are dry. A tissue works well for wiping them off.
  • Spitting or gurgling: Usually the pod is overfilled, or the airflow is wide open on a tight pod. Fill it a little lower and close the airflow a bit.
  • Faded flavor: The coil built into the pod is worn out, so it's time for a new pod. Q pods usually last 5–10 days, but it all depends on how much you use them.

Questions & Answers

What pods does the GeekVape Wenax Q Ultra use?

It uses GeekVape Q pods in 0.4Ω, 0.6Ω, 0.8Ω and 1.2Ω, and the kit comes with a 0.8Ω and a 0.4Ω.

Is the Wenax Q Ultra draw-activated?

Yes. It fires when you inhale, and there's no fire button to press.

How do you fill the Wenax Q Ultra?

Pull the pod out and open the silicone plug on its side. Fill it and close the plug, and then let a new pod sit for at least 10 minutes before you vape on it.

What's the battery on the Wenax Q Ultra?

It has a built-in 1300mAh battery, and it charges over USB-C at 2A.

How many watts is the Wenax Q Ultra?

Up to 30W. You set the wattage on the touchscreen, within the range of the pod that you're using.

Does the Wenax Q Ultra have a touchscreen?

Yes, it has a 2.51-inch touchscreen with three display styles, and it wakes up when you lift the device.

Is the Wenax Q Ultra good for nicotine salts?

Yes. The 0.8Ω and 1.2Ω Q pods at low wattage are made for nic salts, and most people start around 24 to 40mg. If you'd rather use a lower-nicotine freebase, go with the 0.4Ω pod.

Do Wenax U pods fit the Wenax Q Ultra?

No, it only takes Q pods. The U pods are made for the Wenax U and Sonder U.

How long does a Wenax Q Ultra pod last?

Usually 5–10 days. It all depends on how much you vape and how sweet your e-liquid is.

For use by adults 21+.

Customer Reviews

We just relaunched our website, so our reviews got a fresh start too. Own one of these? We'd love for you to be one of the first to share your thoughts!

Contact Us