
GeekVape
GeekVape S100 (Aegis Solo 2) 100W Kit
$54.95
The GeekVape S100, also called the Aegis Solo 2, is an IP68 100W box mod that takes one removable 18650. It has a 1.08" screen and an A-Lock switch, and it comes with the 5.5ml Z Sub-Ohm tank.
- Up to 100W on one removable 18650
- IP68 water and dust protection
- 5.5ml Z tank and two Z coils included
Replacement coils: GeekVape Z Series Coils (Zeus Coils) →
Limit 3 per order. Need more? Request a larger quantity.
- Output
- Up to 100W
- Battery
- 1 × 18650
- Protection
- IP68
- Screen
- 1.08" color
- Tank
- Z Sub-Ohm, 5.5ml
- Coils
- Z series
The GeekVape S100 (Aegis Solo 2) 100W Kit is the small one in the Aegis family, and it's sealed to IP68, so it's built to handle water and dust. It runs on one removable 18650 battery, the kind you take out and swap, and it goes up to 100W.
You also get GeekVape's Z Sub-Ohm tank, which holds 5.5ml and comes with two Z series coils. If you've got a spare 18650 charged up, you can pop it in and keep right on going.
- Up to 100W from one removable 18650, which is sold separately
- IP68 water and dust protection, with a flip cover over the USB-C port
- A-Lock is a slide switch that stops the buttons from getting pressed by accident
- A 1.08" color screen
- Comes with the 5.5ml Z Sub-Ohm (2021) tank, plus 0.2Ω and 0.25Ω Z series coils
- USB-C charging at 5V/2A
What's in the Box
- 1 × GeekVape S100 (Aegis Solo 2) mod
- 1 × Z Sub-Ohm (2021) tank, 5.5ml
- 1 × Z 0.2Ω coil (installed, 70–80W) and 1 × Z 0.25Ω coil (45–57W)
- 1 × spare 5.5ml glass, spare parts and a coil tool
- 1 × USB-C cable
- The battery isn't included, so you'll need one 18650
GeekVape S100 Specs & Features
| Spec | GeekVape S100 (Aegis Solo 2) Kit |
|---|---|
| Output | Up to 100W |
| Battery | 1 × 18650, sold separately |
| Resistance range | 0.1–3Ω |
| Screen | 1.08" color |
| Protection | IP68 water and dust resistant |
| Safety | A-Lock slide switch, low-voltage warning at 3.3V |
| Tank | Z Sub-Ohm (2021), 5.5ml |
| Coils | GeekVape Z series |
| Charging | USB-C with a flip cover, 5V/2A |
| Colors | Red |
| Also listed as | GeekVape Aegis Solo 2, Geek Vape S100, Geekvape S100 Aegis Solo 2 starter kit |
Greg's Tip: Running a mod that takes removable 18650, 20700 or 21700 batteries? Always keep a charged spare on you (a full set if it takes two), so a dead battery doesn't leave you out of luck. Some mods let you vape while they charge, called pass-through. But plenty don't. For 18650s, the Samsung 25R is the workhorse of the vaping industry. And never carry a loose battery in a pocket or purse. Use a battery case. Our 18650 battery safety guide covers the rest.
Greg's Tip: Always keep a spare glass for your tank. If the glass breaks and you don't have one, you're out of luck. And if it does break, put the whole tank in a Ziploc bag right away so you don't lose any O-rings. Then check the O-rings for nicks before you put it back together. Need one? Check our replacement glass.
Aegis Solo 2 vs Solo 3
| S100 (Aegis Solo 2) | Aegis Solo 3 (18650 version) | |
|---|---|---|
| Power | Up to 100W | 5–100W |
| Battery | 1 × 18650 | 1 × 18650 |
| Screen | 1.08" color | 0.96" color |
| Lock | A-Lock slide switch | Smart Lock sensor |
| Coils in the kit | Z 0.2Ω and 0.25Ω | Z 0.2Ω and 0.4Ω |
The S100 name shows up on both, so check the screen size if you aren't sure which one you've got. Our Aegis Solo 3 18650 kit has its own page.
GeekVape S100 Coils
The Z Sub-Ohm tank takes GeekVape Z series coils. Sub-ohm means the coil is under 1 ohm, and that's made for bigger clouds at higher watts. The 0.2Ω comes installed, and the 0.25Ω dual mesh is the spare.
We sell GeekVape Z series coils by the pack. On one 18650, the lower-wattage coils will also get you more time between battery swaps.
Custom Blend Tip: If the buttons stop answering you, check the A-Lock slider before you think something's wrong. It's easy to bump it closed in a pocket, and that's exactly what it's there for.
S100 Battery Guide
You'll need one 18650, and it isn't in the box. We recommend the Samsung 25R or the Hohm Life. You can charge it in the mod over USB-C, but an external battery charger is easier on the battery.
Never, ever carry a naked battery (one without a case) in your pocket or purse. Keep your spares in a battery case, and if you're new to removable batteries, please read our 18650 battery safety guide first.
Best Vape Juice for the GeekVape S100
We suggest 3 to 6mg of our freebase vape juice, which is just regular nicotine. MAX VG (vegetable glycerin, for vapor) works best with these coils, and 50/50 is usually fine at the lower end of the wattage. We mix every bottle by hand after you order it. Not sure about a flavor? Try five of them in a vape juice sampler pack first.
Questions & Answers
Is the GeekVape S100 the same as the Aegis Solo 2?
Yes. GeekVape sells this one as the S100 (Solo 2). It's a different mod from the Aegis Solo 3, which has a smaller screen and a Smart Lock sensor.
What battery does the GeekVape S100 use?
One 18650, sold separately. It isn't a built-in battery, so you can swap in a charged spare.
What coils fit the Aegis Solo 2 tank?
The Z Sub-Ohm tank takes GeekVape Z series coils. The kit has a 0.2Ω and a 0.25Ω, and we sell Z coils by the pack.
Is the GeekVape S100 waterproof?
GeekVape rates it IP68 for water and dust. We still wouldn't go swimming with it, and you'll want to keep the USB-C cover closed.
How much juice does the S100 tank hold?
The Z Sub-Ohm (2021) tank holds 5.5ml.
For use by adults 21+.
| Battery | 1 × 18650 (not included) |
|---|---|
| Output | Up to 100W |
| Screen | 1.08" color |
| Durability | IP68 water and dust resistant; A-Lock slide switch |
| Tank | Z Sub-Ohm (2021), 5.5ml |
| Coils | GeekVape Z series (0.2Ω and 0.25Ω included) |
| Charging | USB-C, 5V/2A |
| In the box | S100 mod, Z Sub-Ohm (2021) tank (5.5ml), 0.2Ω and 0.25Ω Z coils, coil tool, spare parts, spare 5.5ml glass, USB-C cable |
See our Shipping Policy and Returns.
You May Also Like
Customer Reviews
We just relaunched our website, so our reviews got a fresh start too. Own one of these? We'd love for you to be one of the first to share your thoughts!




