
GeekVape
GeekVape Go Pod Kit
$15.95
The GeekVape Go is a refillable pod kit with a 10ml pod, a built-in 1500mAh battery and a 0.8Ω dual mesh coil. You draw on it to fire it, and it has normal and turbo modes.
- Big 10ml refillable pod
- No button: just draw on it
- 1500mAh battery charges over USB-C
Limit 3 per order. Need more? Request a larger quantity.
- Pod
- 10ml, refillable
- Battery
- Built-in 1500mAh
- Coil
- 0.8Ω dual mesh
- Modes
- Normal & turbo
- Firing
- Draw activated
- Charging
- USB-C
The GeekVape Go Pod Kit is a good first step if you're moving over from disposables. You draw on it and it fires, with no button and no settings to figure out. The difference is that you fill the pod yourself, so you get to pick your own flavor and your own nicotine.
The pod holds a big 10ml, and the coil is built right into it. There's a 1500mAh built-in battery, which GeekVape says lasts up to 4 days. You've got two power modes, normal and turbo, and airflow that adjusts from MTL (mouth-to-lung, a tighter draw like a cigarette) to RDL (restricted direct-lung, a little more open).
- A refillable 10ml pod that fills from the side
- A built-in 1500mAh battery, and it charges over USB-C
- A 0.8Ω dual mesh coil that's built into the pod
- Normal and turbo modes
- Draw activated, so there's no button to press
- Adjustable airflow, from a tight MTL draw to a looser RDL draw
What's in the Box
- 1 × GeekVape Go device (1500mAh built in)
- 1 × GeekVape Go 0.8Ω pod, 10ml
- 1 × user manual
GeekVape Go Specs & Features
| Spec | GeekVape Go |
|---|---|
| Battery | Built-in 1500mAh |
| Pod | 10ml, refillable PCTG, side fill, magnetic |
| Coil | 0.8Ω dual mesh, built into the pod |
| Modes | Normal and turbo |
| Firing | Draw activated |
| Airflow | Adjustable, MTL to RDL |
| Display | LED |
| Charging | USB-C |
| Colors | Black, Green, Silver |
| Also listed as | Geek Vape Go pod system, Geekvape Go pod kit |
Best Vape Juice for the GeekVape Go
The 0.8Ω pod does well with nic salt, a smoother kind of nicotine made for pod kits. Most people start around 24 to 40mg. If you're coming off a disposable, those are usually 50mg, so you might want to start there. When in doubt, 50/50 is usually a great option on a coil like this. We mix every bottle of our vape juice by hand, exactly how you order it, and you can set the nicotine to the strength you want. A salt nic sampler pack is an easy way to try five flavors before you invest in a bigger bottle.
Custom Blend Tip: A new pod is the one thing to be patient with. Fill it, then let it sit for at least 10 minutes before your first puff. The longer, the better. And start out in normal mode, since you can always switch to turbo later.
How to Fill the GeekVape Go
- Charge the Go over USB-C.
- Pull the pod off the device. It's held on with magnets.
- Open the fill port on the side, and fill the pod slowly with juice. Never overfill it.
- Let a new pod sit for at least 10 minutes. The longer, the better.
- Put the pod back on, set the airflow and take a short draw.
GeekVape Go Replacement Pods
The coil is built into the pod, so when the flavor gets muted, you replace the pod. We don't carry Go pods yet, but you can request GeekVape Go pods, and we'll do our best.
Questions & Answers
Is the GeekVape Go refillable?
Yes. It's a refillable pod kit, not a disposable. The pod holds 10ml, and you can fill it with the juice that you like.
How long does the GeekVape Go battery last?
GeekVape says up to 4 days on its 1500mAh battery. It really depends on how much you vape, and you can recharge it over USB-C.
Does the GeekVape Go have a button?
No, it's draw activated. You just take a drag, and it fires.
What nicotine should I use in the GeekVape Go?
The 0.8Ω pod works well with nic salt, and most people start around 24 to 40mg. If you're coming off a 50mg disposable, you might want to start at 50mg.
Do I need to change the coil in the GeekVape Go?
Not by itself. The coil is built into the pod, so you replace the whole pod.
For use by adults 21+.
| Battery | Built-in 1500mAh |
|---|---|
| Pod | 10ml, refillable, side fill |
| Coil | 0.8Ω dual mesh, built into the pod |
| Modes | Normal and turbo |
| Firing | Draw activated |
| Airflow | Adjustable, MTL to RDL |
| Charging | USB-C |
| In the box | GeekVape Go device, 0.8Ω pod (10ml), user manual |
See our Shipping Policy and Returns.
You May Also Like
Customer Reviews
We just relaunched our website, so our reviews got a fresh start too. Own one of these? We'd love for you to be one of the first to share your thoughts!




