
GeekVape
GeekVape Aegis Solo 3 (S100) Kit – 3000mAh Built-In Battery
$53.95
The GeekVape Aegis Solo 3 (S100) kit with a built-in 3000mAh battery. It's a tough IP68 100W box mod that comes with the Z Sub-Ohm tank, and there are no batteries to buy.
- Built-in 3000mAh, no batteries to buy
- Up to 100W in a sealed IP68 body
- 5.5ml Z tank & two coils included
Replacement coils: GeekVape Z Series Coils (Zeus Coils) →
Limit 3 per order. Need more? Request a larger quantity.
- Output
- 5–100W
- Battery
- Built-in 3000mAh
- Chip
- AS Chip 4.0
- Protection
- IP68
- Tank
- Z Sub-Ohm, 5.5ml
- Charging
- USB-C, 2A
The GeekVape Aegis Solo 3 (S100) Kit – 3000mAh Built-In Battery is one of the simplest ways to get into an Aegis box mod, which is a box-shaped vape with a screen and power that you can adjust. The GeekVape Aegis Solo 3 built-in battery version has a 3000mAh battery sealed inside. That means you don't have to buy 18650 batteries (the removable kind a lot of box mods use), and you don't have to charge them separately or carry them around. The mod goes up to 100W, and it has IP68 water and dust protection, plus drop protection. The kit also comes with the 5.5ml Z Sub-Ohm tank and two coils. Give it one full charge over USB-C, and it's ready to go. If you want a tough Aegis and you'd rather not deal with removable batteries, we'd recommend this one.
- Built-in 3000mAh battery, so there's nothing extra to buy. Just charge it over USB-C at 2A
- Up to 100W on the AS Chip 4.0, and Smart mode sets the power for whatever coil you put in
- IP68 water and dust protection, plus shock protection
- Smart Lock, a hold-to-fire sensor that keeps it from going off in your pocket
- Complete kit with the 5.5ml Z Sub-Ohm tank, plus 0.2Ω and 0.4Ω Z series coils
- One price covers everything you need except the vape juice
What's in the Box
- 1 × GeekVape Aegis Solo 3 mod with built-in 3000mAh battery
- 1 × Z Sub-Ohm (2021) tank, 5.5ml
- 1 × Z 0.2Ω coil (installed, 70–80W) and 1 × Z 0.4Ω coil (50–60W)
- 1 × coil tool, USB-C cable and user manual
- The only other thing you'll need is vape juice
Aegis Solo 3 Built-In Battery Kit Specs & Features
| Spec | GeekVape Aegis Solo 3 Kit (3000mAh) |
|---|---|
| Output | 5–100W |
| Battery | Built-in 3000mAh (not removable) |
| Resistance range | 0.1–3.0Ω |
| Chip | AS Chip 4.0 |
| Modes | Smart, Power, Boost, Memory, ECO and temperature control (TCR) |
| Screen | 0.96" color TFT |
| Protection | IP68 waterproof and dustproof, plus shock-resistant |
| Charging | USB-C, 5V/2A |
| Tank | Z Sub-Ohm (2021), 5.5ml, top fill, top airflow |
| Also listed as | Geek Aegis Solo 3 kit, Aegis Solo kit 3, GeekVape Aegis Solo 3 built-in battery kit |
Aegis Solo 3 Price: Which Version Should You Buy?
| Version | Battery | Tank | Best for |
|---|---|---|---|
| Kit – 3000mAh (this page) | Built-in | Included | Your first box mod, with no batteries to deal with |
| Kit – 18650 | Removable 18650 | Included | Swapping batteries on long days |
| Mod only – 3000mAh | Built-in | Not included | You already own a tank |
| Mod only – 18650 | Removable 18650 | Not included | You own a tank and spare 18650s |
The Aegis Solo 3 price is the same for both kit versions, and with the built-in kit, there's no extra battery to pay for. You can compare the 18650 kit, the 3000mAh mod only and the 18650 mod only.
Built-In 3000mAh Battery: What to Expect
The 3000mAh battery is sealed inside the mod. With the 0.4Ω coil at around 50–60W, most people get through a day of light to moderate vaping. At 80W on the 0.2Ω coil, it won't last as long, because more power uses more battery. It all depends on how much you use it. A full charge over USB-C at 2A takes roughly two hours. You can't swap in a spare battery on a long day, so keep the cable close by. Once the battery wears out, you replace the whole device, not just the battery. Please never charge your vape unattended. You always want to be awake and nearby while it charges, and our battery safety guide has more on that.
If you'd rather have batteries that you can swap, take a look at the Aegis Solo 3 18650 kit.
GeekVape Aegis Solo 3 Tank Replacement, Glass & Coils
The Z Sub-Ohm tank in this kit takes GeekVape Z series coils. Sub-ohm means the coil is under 1 ohm, and it's made for bigger clouds at higher watts. If you need a GeekVape Aegis Solo 3 tank replacement, any 510 tank will fit. A 510 is the standard screw-on thread that most tanks use. The GeekVape Zeus Sub-Ohm Tank uses the same Z coils, and it sits flush at 26mm. For a GeekVape Aegis Solo 3 glass replacement, please request Z tank glass, and we'll do our best.
We sell GeekVape Z series coils by the pack. You'll know when it's time to change one. It'll just start putting out less vapor, and the flavor will be a little muted.
Will It Work With My Setup?
- GeekVape Z series coils in the included tank
- Other 510 tanks up to about 26mm
- Any USB-C charger (5V/2A recommended)
- 18650 or 21700 batteries (the battery is built in)
- Non-Z coils in the Z tank
- Pods from a pod system
Custom Blend Tip: Since you can't swap in a fresh battery, we recommend plugging it in whenever it's handy, like when you're sitting at your desk. A full charge at 2A takes roughly two hours, so don't wait until it dies.
Best Vape Juice for the Aegis Solo 3
With the Z tank and sub-ohm coils, this is a direct-to-lung kit. That means the vapor goes straight into your lungs, instead of sitting in your mouth first. A kit like this needs freebase nicotine, which is just the regular kind of nicotine, and we always like to suggest 3 to 6mg.
Get our freebase vape juice in 50/50 or MAX VG for this tank. MAX VG is the really thick one that makes tons of vapor, and it's the best match for the tank in this kit. 50/50 is usually fine at lower watts. Each bottle of Custom Blend Vape Juice is made to order, just like a drink at a bar. If you're not sure which flavor to get, our e-juice sample pack has five flavors in it, so you can find one you like before you invest in a bigger bottle.
How to Set Up the Aegis Solo 3 Kit
- Charge the mod over USB-C until the battery icon is full.
- Fill the Z tank from the top, and let the new coil soak for at least 10 minutes. The longer, the better, and an hour plus is ideal.
- Screw the tank on, and then click the fire button 5 times to turn the mod on.
- Try Smart mode first, or set the wattage yourself with the up and down buttons. On the 0.2Ω coil, start around 50W, take a few drags, and then slowly work your way up.
- Click fire 3 times to open the menu. That's where you'll find the modes, the lock settings, the puff counter and the colors.
Aegis Solo 3 Kit Reviews
- Convenience: the built-in version is popular with people buying their first box mod, because they don't have to deal with 18650 batteries.
- Build: reviewers say the IP68 sealing keeps out water and dust, the solid frame holds up to drops, and it does fine on job sites, too.
- Lock: the hold-to-fire Smart Lock works reliably, and you can also switch it to a regular button lock.
- Keep in mind: you can't swap batteries on a long day, and the battery gauge only reads in 10% steps.
Troubleshooting
- Won't fire: the Smart Lock is probably on. Hold the mod so your hand covers the sensor on the back, or change the lock setting in the menu.
- Won't turn on: plug it in for a few minutes, and then click fire 5 times.
- No coil detected: tighten the coil, and screw the tank all the way down onto the 510.
- Leaking: make sure the coil is seated and the top cap is closed, and please don't overfill it.
Questions & Answers
Does the Aegis Solo 3 have a built-in battery?
This version does. It has a 3000mAh battery sealed inside. There's also an 18650 version that takes a removable battery.
How long does the Aegis Solo 3 3000mAh battery last?
It all depends on how much you use it, but most people get about a day of light to moderate vaping at around 50–60W. You'll get less at higher power. It recharges over USB-C in roughly two hours.
Can I replace the battery in the 3000mAh Aegis Solo 3?
No. The built-in battery isn't made to be replaced. If you want batteries that you can swap, go with the 18650 version.
What's the Aegis Solo 3 price?
Both kit versions are the same price, and you'll find it at the top of this page. The built-in kit doesn't need a separate battery, either.
Where can I get a GeekVape Aegis Solo 3 tank replacement?
Any 510 tank will fit. The GeekVape Zeus Sub-Ohm Tank uses the same Z coils as the tank that comes in the kit.
Do you sell GeekVape Aegis Solo 3 glass replacement?
Please request it, and we'll do our best to get the right glass for the Z Sub-Ohm 2021 tank.
What coils does the Aegis Solo 3 kit use?
It takes the whole GeekVape Z series. That's the Z0.15, Z0.2, Z0.25 dual and Z0.4, and the XM versions too.
Is the built-in battery Aegis Solo 3 good for beginners?
Yes. It's one of the simplest Aegis mods to own, since there are no removable batteries to look after. Smart mode sets the wattage for you, and it's very tough, with IP68 water and dust protection. If you're brand new, our beginner's guide has some great info in it.
For use by adults 21+.
| Battery | Built-in 3000mAh |
|---|---|
| Output | 5–100W, Smart, Power, Boost, Memory, ECO and TCR modes |
| Chip | AS Chip 4.0 |
| Screen | 0.96" color TFT |
| Durability | IP68 water, dust and shock resistant; Smart Lock |
| Tank | Z Sub-Ohm (2021), 5.5ml, top fill |
| Coils | GeekVape Z series (0.2Ω and 0.4Ω included) |
| Charging | USB-C, 2A |
| In the box | Aegis Solo 3 mod (3000mAh built-in), Z Sub-Ohm tank (5.5ml), 0.2Ω and 0.4Ω Z coils, coil tool, USB-C cable |
See our Shipping Policy and Returns.
You May Also Like
Customer Reviews
We just relaunched our website, so our reviews got a fresh start too. Own one of these? We'd love for you to be one of the first to share your thoughts!




