WARNING: This product contains nicotine. Nicotine is an addictive chemical.
All our vape juice is fully customizable · Try 5 flavors in a sample pack → About UsSign in
FreeMax Maxus 2 200W Kit with M Pro 3 Tank

FreeMax

FreeMax Maxus 2 200W Kit with M Pro 3 Tank

$59.95

The FreeMax Maxus 2 200W kit is a compact dual-18650 box mod with a 1.06" color screen, RGB light strips and a slide lock, and it comes with the 5ml M Pro 3 mesh tank.

  • Up to 200W from two 18650s
  • 5ml M Pro 3 mesh tank included
  • Slide lock for pocket carry

Limit 3 per order. Need more? Request a larger quantity.

  • SKU: MOD-FREEMAX-MAXUS-2-KIT
  • Availability: In stock
  • Shipping: Calculated at checkout · Age verification required
Output
5–200W
Batteries
2 × 18650
Chip
FM Chip 3.0
Screen
1.06" color
Tank
M Pro 3, 5ml
Coils
0.15Ω + 0.2Ω mesh

The FreeMax Maxus 2 200W Kit pairs FreeMax's second-generation Maxus box mod with the M Pro 3 mesh tank. A box mod is the bigger, more powerful kind of vape. The FreeMax Maxus 2 runs on two 18650 batteries, the removable kind that you charge, for up to 200W, and it's still one of the smaller dual-battery mods around. It has a 1.06-inch color screen and RGB light strips that you can adjust, and a slide lock keeps the fire button from going off in your pocket.

The 5ml M Pro 3 tank fills from the top and comes with two FreeMax mesh coils, so the whole FreeMax Maxus kit is ready to go right out of the box once you add two batteries. It's made for big clouds and DTL (direct-to-lung) vaping, which is a wide-open draw that goes straight to your lungs.

  • 5–200W from two 18650 batteries (sold separately), with Power, VPC, Bypass, temperature control (TC) and TCR modes
  • It's compact for a 200W mod, at about 89.5 × 51.9 × 31mm and 143g without batteries
  • 1.06" color TFT screen and RGB light strips, and you can adjust the color, speed and brightness or turn them off
  • A slide lock on the front keeps the fire button from going off in your pocket, and the battery door is magnetic
  • The 5ml M Pro 3 tank has a sliding top fill that doubles as a child lock, adjustable side airflow and a wide 810 drip tip (810 is the wider mouthpiece size)
  • The tank takes FreeMax 904L M mesh coils and our FreeMax Mesh Pro coils

What's in the Box

  • 1 × FreeMax Maxus 2 box mod
  • 1 × M Pro 3 tank (5ml) with the M1-D 0.15Ω mesh coil installed
  • 1 × 904L M2 0.2Ω mesh coil
  • 1 × spare glass tube, spare O-rings and a USB-C cable
  • No batteries are included in the box, so you'll need two 18650s

FreeMax Maxus 2 Specs & Features

SpecFreeMax Maxus 2 200W Kit
Output5–200W
Batteries2 × 18650, sold separately
ChipFM Chip 3.0 (short-circuit, overheat and over-discharge protection)
ModesPower (Normal, Sport, Eco), VPC, Bypass, temperature control and TCR
Resistance range0.1–3.0Ω
Screen1.06" color TFT
LightingRGB light strips, adjustable or off
SafetySlide lock for the fire button
SizeAbout 89.5 × 51.9 × 31mm, 143g (mod, no batteries)
Tank fitTanks up to about 28mm sit flush
ChargingUSB-C
TankM Pro 3, 5ml, sliding top fill, adjustable side airflow, 810 drip tip
ColorsVaries with stock (FreeMax makes it in black, blue, gunmetal and rainbow)
Also listed asFreeMax Maxus 2 200W Box Mod Kit, FreeMax Maxus 2 Vape Starter Kit

Greg's Tip: Running a mod that takes removable 18650, 20700 or 21700 batteries? Always keep a charged spare on you (a full set if it takes two), so a dead battery doesn't leave you out of luck. Some mods let you vape while they charge, called pass-through. But plenty don't. For 18650s, the Samsung 25R is the workhorse of the vaping industry. And never carry a loose battery in a pocket or purse. Use a battery case. Our 18650 battery safety guide covers the rest.

Greg's Tip: Always keep a spare glass for your tank. If the glass breaks and you don't have one, you're out of luck. And if it does break, put the whole tank in a Ziploc bag right away so you don't lose any O-rings. Then check the O-rings for nicks before you put it back together. Need one? Check our replacement glass.

FreeMax Maxus 2 Battery Guide

Just like the original FreeMax Maxus 200W, the Maxus 2 needs two 18650 batteries, and they're sold separately. We recommend a matched pair of high-drain batteries (made to put out a lot of power) rated at least 20A, like the Samsung 25R. A matched pair is two of the same battery, bought and used together. Always charge them together and replace them together. The mod does charge over USB-C, but an external charger is easier on the batteries, and it also lets you keep a charged pair ready to go.

If this is your first mod with external 18650 batteries, please make sure that you read our 18650 battery safety guide first. And never, ever carry a naked 18650 battery (one without a case) in your pocket or your purse, especially with keys or coins.

FreeMax Maxus 2 Coils: M Pro 3 Coil Guide

The M Pro 3 tank uses FreeMax's push-in mesh coils. The kit comes with the M1-D 0.15Ω double mesh, which is already installed, and the 904L M2 0.2Ω mesh. The tank also takes the rest of the 904L M coils and FreeMax Mesh Pro coils, so FreeMax Maxus coils are easy to find.

M1-D 0.15Ω Double MeshNot stocked
50–80WInstalled; dense, warm vapor (best around 70W)
904L M2 0.2Ω MeshNot stocked
60–90WIn the box; bright flavor
Mesh Pro 0.2Ω Double MeshIn stock
60–90WFits the M Pro 3; we stock it

We sell FreeMax Mesh Pro replacement coils by the pack, and it's a good idea to always have a spare coil or two. If you'd like a second tank, take a look at the FreeMax Maxus Pro tank.

Best FreeMax Maxus 2 Settings

CoilStart atSweet spotMode
M1-D 0.15Ω55W65–75WPower (Normal)
904L M2 0.2Ω60W70–80WPower (Normal or Sport)
Longer battery lifeAny coilLow end of the rangePower (Eco)

Sport mode ramps up harder, so the first second of each drag has a little more punch. Eco mode is a little softer, and it saves some battery, too. VPC mode lets you set your own power curve, which means you choose how much power it gives through each second of a drag.

Will It Work With My Tank?

  • Any 510 sub-ohm tank up to about 28mm wide
  • The FreeMax Maxus Pro tank and GeekVape Zeus tank
  • Rebuildable tanks, using TC or TCR with nickel, titanium or stainless wire
  • Tanks wider than about 28mm will overhang
  • Pods and pod cartridges (it's a 510 mod)

Custom Blend Tip: The airflow on the M Pro 3 sits close to the base, so we recommend wiping the mod dry before you set it down. On a new coil, start at the low end, around 55W, and then work your way up to where you normally vape it.

Best Vape Juice for the Maxus 2

The coils in this kit are sub-ohm coils, which means they're under 1 ohm, and they're made for bigger clouds. With the M Pro 3 running at 50–90W, this is a direct-lung kit, so we always like to suggest freebase nicotine (the regular kind of nicotine) at 3 to 6mg, in MAX VG or 50/50. VG, or vegetable glycerin, is the thick part of the juice that makes the vapor, and MAX VG is really thick and produces tons of vapor. Nicotine salt is made for lower-wattage pod systems, so we don't recommend it in this tank.

MAX VG freebase, 3–6mgGreat Smooth, dense vapor; wicks well in FreeMax mesh
50/50 freebase, 3–6mgGood Decent, but thin juice can spit at high wattage
Nicotine saltAvoid Far too strong at these wattages; use salts in a pod system

Here at Custom Blend Vape Juice, every one of our flavors comes as freebase vape juice, and we mix every bottle by hand, exactly how you order it. You get to pick the VG ratio and the exact nicotine strength that you want.

Not sure what flavor to get yet? A vape juice sampler pack gets you five different flavors to try before you invest in a bigger bottle.

How to Use the FreeMax Maxus 2

  1. Open the magnetic battery door and put in two charged 18650s, with the positive ends facing the way they're marked.
  2. Click the fire button 5 times quickly to turn it on, and 5 more times to turn it off.
  3. Use the up and down buttons to set the wattage, and start at the low end of your coil's range.
  4. Click the fire button 3 times to open the menu. That's where you'll find the modes, coil check, screen timeout, theme color, LED settings, °F/°C and puff reset.
  5. Always push the slide lock on before it goes in your pocket.

How to Fill the M Pro 3 Tank

  1. Push and slide the top cap to uncover the fill port.
  2. Fill it slowly down the inside of the glass, and stop a little below the top.
  3. Slide the cap closed until it locks.
  4. For a brand-new coil, let it sit at least 10 minutes before you vape, so the cotton can soak up the juice. The longer, the better. Filling it the night before and letting it sit overnight is even better.

FreeMax Maxus 2 Reviews

  • Size and feel: It's small and comfortable for a dual-battery mod, and it feels very solid.
  • Lights: Owners like the RGB strips, and they say the lights don't noticeably drain the batteries.
  • Tank: The M Pro 3 gets praise for flavor, clouds and how easy it is to fill from the top. Owners report very few leaks.
  • Keep in mind: Some of the panels and buttons are plastic. The side airflow also sits close to the base, so be careful when you set it down wet.

Maxus 2 Troubleshooting

  • "Check Atomizer" or no reading: Re-seat the coil and screw the tank on snugly. Then clean the 510 pin, which is the little pin in the middle of the connection.
  • Won't fire: Make sure the slide lock is off and that both batteries are charged and facing the right way.
  • Burnt taste on a new coil: It probably wasn't primed long enough. Prime the next one for at least 10 minutes, and start at a lower wattage and work your way up.
  • Gurgling or spitting: Take a few short drags. If that doesn't do it, turn the wattage up a little or use a thicker juice like our MAX VG.

Questions & Answers

Does the FreeMax Maxus 2 come with batteries?

No. You'll need two 18650 batteries, and they're sold separately. We recommend a matched pair of Samsung 25Rs.

What coils does the FreeMax Maxus 2 kit use?

The M Pro 3 tank takes FreeMax push-in mesh coils. The M1-D 0.15Ω and the 904L M2 0.2Ω both come in the box, and it also takes the rest of the 904L M series and FreeMax Mesh Pro coils.

What's the difference between the FreeMax Maxus 200W and the Maxus 2?

Both are 200W FreeMax mods, and the Maxus 2 is the newer, smaller design. It runs on two 18650s and has a 1.06-inch color screen, RGB light strips and a slide lock. It also comes with the M Pro 3 tank instead of the M Pro 2.

What are the best FreeMax Maxus 2 settings?

We recommend Power mode at 65–75W for the 0.15Ω M1-D, or 70–80W for the 0.2Ω M2. On a new coil, start a little lower and work your way up, and the coil will usually last longer if you do that.

How do I lock the FreeMax Maxus 2?

Push the slide lock on the front. It stops the fire button from working, so the mod can't go off in your pocket.

How much does the M Pro 3 tank hold?

It holds 5ml of vape juice.

Can I charge the Maxus 2 with USB-C?

Yes, it charges both batteries over USB-C, but an external charger is easier on them. Either way, never charge your vape unattended. You always want to be awake and nearby whenever it's charging.

Is the FreeMax Maxus 2 good for beginners?

Yes, if you want direct-lung clouds. You just set the wattage and vape, and the extra modes are there when you want them. Just remember that external 18650 batteries take more care than a pod system, and they're only for people that are very responsible. If you'd rather have a mouth-to-lung draw (a tighter draw, like a cigarette), or you like nic salts, we recommend a pod system instead. Our beginner's guide has some great info in it.

Can I buy just the FreeMax Maxus 2 mod?

This listing is the kit with the M Pro 3 tank. If you only want the mod, please request it, and we'll do our best.

For use by adults 21+.

Customer Reviews

We just relaunched our website, so our reviews got a fresh start too. Own one of these? We'd love for you to be one of the first to share your thoughts!

Contact Us