WARNING: This product contains nicotine. Nicotine is an addictive chemical.
All our vape juice is fully customizable · Try 5 flavors in a sample pack → About UsSign in
FreeMax Replacement Coils (904L M, M1-D, MX, Fireluke X & TX Coils)

FreeMax

FreeMax Replacement Coils (904L M, M1-D, MX, Fireluke X & TX Coils)

From $8.95

FreeMax replacement coils, sold by the pack. The 904L M and M1-D heads fit the M Pro and Maxus Pro tanks, the MX heads fit the Maxus pods, and the X and TX heads fit the Fireluke tanks. Check the fit chart to find the one for your tank.

  • 904L M, M1-D, MX, X and TX heads
  • Fit chart for M Pro, Maxus and Fireluke
  • All mesh coils
Resistance: choose one

Step 1 of 1: choose Resistance to continue

Limit 5 per order. Need more? Request a larger quantity.

  • SKU: COIL-FREEMAX-REPLACEMENT-COIL
  • Availability: In stock
  • Shipping: Calculated at checkout · Age verification required
Resistances
0.15Ω – 0.2Ω
Wattage
About 40–110W
Families
904L M, MX, X, TX
Wick
Tea-fiber cotton
Draw style
Direct lung
Sold as
By the pack

FreeMax Replacement Coils come in several families that look very much alike, but each family fits different tanks. So we put every FreeMax head (another word for coil) that we stock on one page, with a chart that shows what fits what. The 904L M and M1-D heads fit the M Pro, Maxus Pro (M Pro 2) and M Pro 3 tanks. The MX heads fit FreeMax's Maxus DTL pods, and DTL means direct-to-lung, where the vapor goes straight to your lungs for big clouds. The Fireluke X and TX heads fit the Fireluke M, 2, 3 and 4. Every one of these is a mesh coil, and they all use cotton for the wick, which is the part that soaks up the juice. We sell all of them by the pack. First, find your tank in the chart, and then pick your coil.

  • A dozen-plus FreeMax coils in one place, all sold by the pack
  • 904L M and M1-D heads for the FreeMax Maxus Pro tank and the M Pro 3 in the Maxus 2 kit
  • MX heads for FreeMax Maxus DTL pods, X and TX heads for the Fireluke tanks
  • If you have a Mesh Pro tank, the 0.2Ω double mesh has its own page, FreeMax Mesh Pro coils
  • Made for freebase e-liquid, the regular kind of nicotine, at a low strength

What's in the Box

  • FreeMax coils by the pack, in the type that you choose
  • Up to 5 per order

Which FreeMax Coil Fits My Tank?

Your tankCoils on this page that fitAlso fits
M Pro 3 tank (in the Maxus 2 kit)M1-D 0.15Ω (stock coil), M Pro 3 Coil, 904L M1, M2, M4, M5Mesh Pro 0.2Ω
Maxus Pro / M Pro 2 tank904L M1 (in the box), M2 (installed), M4, M5, M1-DMesh Pro 0.2Ω
Original M Pro tank904L M1, M2, M4, M5Mesh Pro 0.2Ω
Maxus DTL pod / Maxus Max kitMX1 0.15Ω, MX2 0.2Ω, MX-1 0.15Ω, MX4 0.15ΩNone
Fireluke M tankFireluke M TX1, TX2, Fireluke X1, X2None
Fireluke 2 tank (Twister kit)Fireluke M TX1, TX2, Fireluke X1, X2None
Fireluke 3 / Maxluke tankFireluke X1, X2None
Fireluke 4 tankFireluke X1, X2None
Mesh Pro, FireLuke, FireLuke Pro tanksNone on this pageMesh Pro 0.2Ω
Fireluke Solo, Fireluke 22, MarvosNone (FL, DTL/MTL and MS coils)Request them

The coil families don't swap between tank types. An MX head won't fit an M Pro tank, and a 904L M head won't fit a Fireluke. If you're not sure which tank you have, the name is printed right on its base.

FreeMax Coil Specs & Features

CoilResistanceWattageMeshFamily
904L M10.15Ω40–70W (best ~65W)Single904L M (M Pro)
904L M20.2Ω60–90W (best ~80W)Dual904L M (M Pro)
904L M40.15Ω70–110W (best ~95W)Quad904L M (M Pro)
904L M5See boxSee boxNot listed904L M (M Pro)
M1-D0.15Ω50–80W (best ~70W)Double-D (parallel)M Pro 3
M Pro 3 CoilSee boxSee boxNot listedM Pro 3
MX10.15Ω50–80W (best ~70W)SingleMX (Maxus pod)
MX20.2Ω60–90WDualMX (Maxus pod)
MX-10.15ΩSee boxNot listedMX (Maxus pod)
MX40.15ΩSee boxNot listedMX (Maxus pod)
Fireluke X10.15Ω40–80WSingleX (Fireluke)
Fireluke X20.2Ω40–80WDualX (Fireluke)
Fireluke M TX10.15Ω40–90WMeshTX (Fireluke M / 2)
Fireluke M TX20.2Ω40–80WMeshTX (Fireluke M / 2)

FreeMax 904L M & M1-D Coils (M Pro Tanks)

The 904L M series uses FreeMax's SS904L mesh, and it fits every M Pro tank, including the Maxus Pro (M Pro 2) and the M Pro 3. The M1-D is the newer Double-D head. It has two mesh strips side by side, and it's the coil that comes installed in the M Pro 3.

904L M1 0.15ΩIn stock
40–70WThe gentlest one, best around 65W
M1-D 0.15Ω Double-DIn stock
50–80WComes in the M Pro 3, best around 70W
904L M2 0.2ΩIn stock
60–90WA good all-around coil, best around 80W
904L M4 0.15ΩIn stock
70–110WMade for high power, best around 95W

FreeMax MX Coils (Maxus Pods)

MX coils are the plug-in version of FreeMax's M Pro mesh heads. They're made for the Maxus DTL pod, which is the pod that the Maxus Max kit uses.

MX1 0.15Ω MeshIn stock
50–80WA more open draw, best around 70W
MX2 0.2Ω MeshIn stock
60–90WGives you fuller flavor

FreeMax Fireluke X & TX Coils

FreeMax lists its X mesh heads for the Fireluke M, Fireluke 2, Fireluke 3 and Fireluke 4. The TX heads were made for the Fireluke M and the Fireluke 2, and the Fireluke 2 is the tank that comes in the Twister kit.

Fireluke X1 0.15ΩIn stock
40–80WSingle mesh
Fireluke X2 0.2ΩIn stock
40–80WDual mesh
Fireluke M TX1 0.15ΩIn stock
40–90WA good mix of flavor and clouds
Fireluke M TX2 0.2ΩIn stock
40–80WComes in the Fireluke 2

Custom Blend Tip: These coil families look a lot alike, but they don't swap. If a new coil won't go in all the way, it's probably the wrong family. The name of your tank is printed on its base, so check that against the chart.

Best Vape Juice for FreeMax Coils

MAX VG freebase, 3–6mgGreat Smooth, thick clouds, and the mesh coils handle it well
50/50 freebase, 3–6mgGood It works, with a sharper throat hit
Nicotine saltAvoid Way too harsh at this power, so keep salt nic for a pod system

These are sub-ohm coils, which means they're under 1 ohm and made for bigger clouds. At these wattages, you want freebase nicotine, which is just the regular kind of nicotine. We always like to suggest 3 to 6mg, in 50/50 or MAX VG. MAX VG is very thick and makes a ton of vapor. 50/50 gives you a little more throat hit (the kick you feel in your throat), and it's always a great option when in doubt. Every bottle of our freebase vape juice gets mixed by hand after you order it, so you pick the nicotine strength and the PG (propylene glycol, carries flavor) / VG ratio (the mix of the two base liquids) that you want. If you'd like to try a few flavors first, an e-juice sample pack gets you five of them before you invest in a bigger bottle.

How to Change a FreeMax Coil

  1. Empty the tank or pod and open it up. On the M Pro and Fireluke tanks, you unscrew the base. On a Maxus kit, you lift the pod off.
  2. Pull the old coil out, and push the new one in firmly.
  3. Prime it, which just means soaking the cotton before you vape. Drip 3–4 drops of e-liquid into the top of the coil and onto the cotton that you can see through the side holes.
  4. Put it back together and fill it. Let it sit for at least 10 minutes, and the longer, the better. An hour plus is ideal.
  5. Start at the bottom of the coil's wattage range. Take a few drags, and then turn it up a little at a time to where you normally like it.

FreeMax Coils Reviews

  • Flavor: FreeMax mesh is known for strong, clean flavor, and the 904L M2 and M1-D get the most praise.
  • Coil life: It all depends on how much you use them, and very sweet juices wear out any coil faster.
  • Fit: the families look a lot alike, so please check the fit chart before you order.
  • Juice use: they go through e-liquid fast, like any 0.15–0.2Ω mesh coil at 60W and up.

Troubleshooting

  • Gurgling or spitting: the wattage is too low for the coil, so turn it up a little bit. And try not to overfill it.
  • Leaking from the airflow: make sure the coil is pushed in all the way and the O-rings (the little rubber seals) are seated properly. Check them for nicks, too.
  • Coil won't go in: it's probably the wrong family for your tank, so check the chart.
  • Still tastes burnt after a refill: that coil is done. It all depends on how much you use it, but most last 1–2 weeks.

Questions & Answers

Which FreeMax coil fits my tank?

Check the chart above. The 904L M and M1-D heads fit the M Pro, Maxus Pro and M Pro 3 tanks. The MX heads fit the Maxus DTL pods, and the X and TX heads fit the Fireluke tanks.

What coils does the FreeMax Maxus Pro tank use?

It uses the 904L M series, and it comes with the M2 0.2Ω and the M1 0.15Ω. The M1-D and our Mesh Pro 0.2Ω fit it, too.

What coils does the FreeMax M Pro 3 use?

It comes with the M1-D 0.15Ω and a 904L M2 0.2Ω, and it takes the rest of the 904L M series as well.

Do FreeMax MX coils fit the Maxus Pro tank?

No. MX coils are plug-in heads made for the Maxus DTL pod. The Maxus Pro tank takes the 904L M coils.

What coils fit the Fireluke 2?

The TX1 and TX2 fit it, and it comes with the TX2 0.2Ω. The Fireluke X1 and X2 fit it as well.

Do Fireluke coils fit the Fireluke Solo or Fireluke 22?

No. The Solo uses FL coils, and the Fireluke 22 uses its own DTL and MTL heads. MTL is mouth-to-lung, which is a tighter draw like a cigarette. Please request them, and we'll do our best.

What's the difference between the 904L M1 and the M1-D?

They're both 0.15Ω. The M1 is a single mesh, and it runs at 40–70W. The M1-D is FreeMax's newer Double-D parallel mesh, and it runs at 50–80W.

Can I use nic salts with FreeMax coils?

We don't recommend it at all. Salt nicotine is made for low-wattage pod systems, and at 40W and up, it's way too harsh. We'd recommend 3 to 6mg of freebase instead.

How long does a FreeMax coil last?

It all depends on how much you use it, but most people get 1–2 weeks of daily use. You'll know it's time when it starts putting out less vapor and the flavor gets a little muted. A good prime helps it last longer, and so does going easy on super sweet juices.

Where are the FreeMax Mesh Pro coils?

They have their own page, FreeMax Mesh Pro coils, and those are the 0.2Ω double mesh.

For use by adults 21+.

Customer Reviews

We just relaunched our website, so our reviews got a fresh start too. Own one of these? We'd love for you to be one of the first to share your thoughts!

Contact Us