WARNING: This product contains nicotine. Nicotine is an addictive chemical.
All our vape juice is fully customizable · Try 5 flavors in a sample pack → About UsSign in
VOOPOO Vinci Replacement Pods (Vinci, Vinci X, Vinci 2 & Vinci 3 Pods)

VOOPOO

VOOPOO Vinci Replacement Pods (Vinci, Vinci X, Vinci 2 & Vinci 3 Pods)

Sold out

VOOPOO Vinci replacement pods for the Vinci, Vinci R and Vinci X (5.5ml), the Vinci 2 and Vinci X 2 (6.5ml) and the Vinci 3 (4ml). They come empty, and they take VOOPOO PnP coils.

  • Pods for the Vinci, Vinci 2 and Vinci 3
  • Takes VOOPOO's original PnP coils
  • Holds 4ml to 6.5ml, by model
Pod: choose one

Step 1 of 1: choose Pod to continue

Limit 5 per order. Need more? Request a larger quantity.

  • SKU: COIL-VOOPOO-VINCI-REPLACEMENT
  • Availability: Sold out
  • Shipping: Calculated at checkout · Age verification required
Fits
Vinci, Vinci R, X, 2, X 2, 3
Capacity
4ml – 6.5ml (by model)
Coils
VOOPOO PnP (not included)
Coil fit
Press-fit, no threads
Connection
Magnetic
Sold as
By the pack

We stock genuine VOOPOO Vinci Replacement Pods, the refillable pods for VOOPOO's Vinci pod mods. Each Vinci generation has its own pod shape, so we list them by model. The 5.5ml pod fits the original Vinci, Vinci R and Vinci X, and the 6.5ml pod fits the Vinci 2 and Vinci X 2. The 4ml pod fits the Vinci 3. All three come empty and take VOOPOO's original PnP coils, so you can move your coil over or press in a fresh one. The coil wears out a lot sooner than the pod does, so one pod will usually go through a bunch of coils. If your pod cracks, the fill plug stretches out or it still leaks after you put in a new coil, it's time for a new Vinci pod.

  • Pods for the Vinci, Vinci R and Vinci X (5.5ml), the Vinci 2 and Vinci X 2 (6.5ml) and the Vinci 3 (4ml)
  • Empty pods that take VOOPOO's original PnP coils, from mesh DTL coils (direct-to-lung, a wide-open draw for big clouds) to MTL heads (mouth-to-lung, a tighter draw that feels a lot like a cigarette)
  • The coils just press in from the bottom, so there are no threads to deal with
  • We stock VOOPOO PnP coils by the pack
  • Vinci generations don't share pods, so please check your model before you order
  • Sold by the pack, up to 5 per order

What's in the Box

  • Genuine VOOPOO Vinci pods for the model you choose
  • No coil. Vinci pods come empty, so you'll need a PnP coil
  • Sold by the pack, max 5 per order

Which VOOPOO Vinci Pod Do I Need?

First, figure out which Vinci you have. The model name is printed right on the device. Then pick the pod for that model, because a pod from a different Vinci generation won't fit.

Our optionFitsCapacityFill
Vinci / Vinci R / Vinci X podOriginal Vinci, Vinci R, Vinci X5.5mlSilicone-plug fill port
Vinci 2 / Vinci X 2 podVinci 2, Vinci X 26.5mlSide fill, silicone plug
Vinci 3 podVinci 34mlTop fill

All three of these take the original VOOPOO PnP coils. Still not sure which Vinci you have? Please send us a photo, and we'll do our best to help.

VOOPOO Vinci Pod Specs & Features

SpecVOOPOO Vinci Replacement Pods
Compatible kitsVOOPOO Vinci, Vinci R, Vinci X, Vinci 2, Vinci X 2 and Vinci 3 (each with its own pod)
Capacity5.5ml (Vinci / R / X), 6.5ml (Vinci 2 / X 2), 4ml (Vinci 3)
CoilsVOOPOO PnP coils, press-fit (not included)
ConnectionMagnetic
MaterialPCTG
Sold asBy the pack

Vinci Pod Coils: Which PnP Coil?

Every Vinci pod we carry takes VOOPOO's original PnP coils. If you want a looser direct-lung draw, most people go with the VM1 0.3Ω mesh at 32–40W. If you like it tighter, a 0.6Ω or 0.8Ω head at lower power is a good option. With any coil, stay inside the wattage range that's printed on it and under your Vinci's maximum output.

We sell VOOPOO PnP coils by the pack. PnP X coils are a different size, so they won't fit these pods.

Will It Work With My Device?

  • VOOPOO Vinci (original) and Vinci R
  • VOOPOO Vinci X
  • VOOPOO Vinci 2 and Vinci X 2
  • VOOPOO Vinci 3
  • Vinci Pod, Vinci SE and Vinci Q (2ml built-in-coil pods) use Drag Nano 2 pods
  • VOOPOO Vinci E120, E80 and other Vinci E kits, which use the Vinci PnP X cartridge
  • Drag X, Drag S, Drag X2 and Drag S2 need VOOPOO PnP pods
  • Vinci S, Vinci Air and other Vinci models not listed here

Custom Blend Tip: If your Vinci pod starts to weep, which means it leaks a little at a time from the fill port, try a new pod before you blame the coil. A stretched-out silicone plug is the most common reason that these pods leak.

Best Vape Juice for Vinci Pods

Match your juice to the coil, not the pod. The low-ohm mesh coils are made for bigger clouds, and they need freebase, which is just the regular kind of nicotine. We always like to suggest 3 to 6mg. MAX VG (vegetable glycerin, for vapor) works best in the 0.15–0.3Ω coils, and 50/50 does well in the 0.45Ω coils and up. With a tighter MTL coil, 0.6Ω and up at low power, nic salt works well, too. That's the smoother kind of nicotine that was made for pod kits, and most people start somewhere around 24 to 40mg. If you're coming off a disposable, those are usually 50mg, so that's a good place to start.

MAX VG freebase, 3–6mg (0.15–0.3Ω coils)Great Smooth, dense vapor at 30W and up
50/50 freebaseGreat Works in 0.45Ω and higher coils
Nicotine salt (0.6Ω and up, low power)Good Good in a tighter MTL setup, usually 24–40mg
Nicotine salt in low-ohm DTL coilsAvoid Far too harsh at direct-lung wattage

Grab our freebase vape juice for sub-ohm (coils under 1 ohm, for bigger clouds) coils, or nicotine salts for MTL coils. Every bottle of Custom Blend Vape Juice is mixed by hand after you order it. If you're not sure on a flavor, a vape juice sample pack gets you five different ones to try before you buy a bigger bottle.

How to Set Up a New Vinci Pod

  1. Pull the coil out of your old pod, or prime a new one. To prime a coil, drip 3–4 drops of vape juice on the cotton.
  2. Press the coil firmly into the base of the new pod.
  3. Open the fill plug, which is on the side or the top depending on the model. Fill it slowly down the inside wall, and leave a little room for air.
  4. Close the plug all the way, and snap the pod into your Vinci.
  5. On a new coil, wait at least 10 minutes. The longer, the better, and an hour is great if you can wait. Then start near the low end of its wattage range, take a few easy drags and turn it up slowly from there.
  6. Refill it before the juice level drops below the coil's intake holes, so the cotton never runs dry.

VOOPOO Vinci Pods Reviews

  • Value: one pod lasts through a lot of coils, and a spare doesn't cost you much.
  • Fill plug: this is the most common reason to replace a Vinci pod. Once the silicone plug stretches, it can weep, which means it leaks a little at a time.
  • Coils: owners like that one pod runs everything, from the tight PnP MTL heads to the 0.3Ω mesh.
  • Keep in mind: a lot of the Vinci models look alike, so check the name on your device before you order.

Vinci Pod Troubleshooting

  • Leaking from the fill port: the plug isn't closed all the way, or it's stretched out. A new pod fixes a worn plug.
  • Leaking from the base: the coil isn't pushed all the way in, or its O-ring (the little rubber seal) is torn.
  • No atomizer / fires on and off: wipe the contacts on the pod and the device with a tissue, and then reseat the coil.
  • Burnt taste: the coil is either worn out or it wasn't primed. Swap the coil, as the pod is fine.

Questions & Answers

Do VOOPOO Vinci pods come with a coil?

No. Our Vinci pods are sold empty, so move your coil over or add a VOOPOO PnP coil.

Do Vinci X pods fit the original Vinci?

Yes. The original Vinci, Vinci R and Vinci X all use the same 5.5ml pod.

Do Vinci 2 pods fit the Vinci X 2?

Yes. The Vinci 2 and Vinci X 2 share the 6.5ml side-fill pod, but it won't fit the original Vinci or the Vinci X.

What pod does the Vinci 3 use?

The Vinci 3 has its own 4ml top-fill pod that takes PnP coils, so just choose the Vinci 3 option.

What coils go in VOOPOO Vinci pods?

VOOPOO's original PnP coils, like the VM1 0.3Ω mesh. PnP X coils are larger, so they won't fit.

Do these fit the Vinci Pod or Vinci SE?

No. Those use 2ml pods with a built-in coil, so you'll want our Drag Nano 2 pods.

Do these fit the Vinci E120?

No. The Vinci E120 uses the Vinci PnP X cartridge. Please request one, and we'll do our best.

How do I fill a Vinci pod?

Open the silicone fill plug, and fill it down the inside wall. Leave a little room for air, and close it firmly. On a new coil, wait at least 10 minutes before you vape. The longer, the better.

How long does a Vinci pod last?

It all depends on how much you vape. A PnP coil usually lasts 1 to 2 weeks, and the pod itself lasts through a bunch of coil changes. Replace the pod when it cracks, when the fill plug stops sealing or when it won't seat firmly.

Can I order more than 5 Vinci pods?

We sell them by the pack, up to 5 per order. If you need more, please request a larger quantity.

For use by adults 21+.

Customer Reviews

We just relaunched our website, so our reviews got a fresh start too. Own one of these? We'd love for you to be one of the first to share your thoughts!

Contact Us