
Uwell
Uwell Valyrian 3 Coils 0.14Ω (Valyrian III UN2-2 Dual Mesh)
$10.95
Uwell Valyrian 3 replacement coils: the 0.14Ω UN2-2 dual meshed-H head that's rated 80–90W, sold by the pack. It fits the Valyrian 3 tank and the Valyrian 3 200W kit.
- 0.14Ω UN2-2 dual mesh, rated 80–90W
- The coil that comes with the Valyrian 3
- Valyrian 2 coils fit the tank too
Limit 5 per order. Need more? Request a larger quantity.
- Resistance
- 0.14Ω
- Wattage
- 80–90W
- Coil type
- UN2-2 dual meshed-H
- Draw style
- Direct lung
- Fits
- Valyrian 3
- Sold as
- By the pack
Uwell Valyrian 3 Coils are the coils that Uwell made for its Valyrian III tank. We carry the 0.14Ω UN2-2 dual meshed-H coil, which is the cloud coil, and it's the same one that comes in the box with the Valyrian 3 tank and kit. It's rated 80–90W, and on a dual-battery mod it makes very thick, warm vapor. This is a direct-lung coil, which means you pull the vapor straight into your lungs instead of holding it in your mouth first. We sell Valyrian 3 coils by the pack, so it's easy to keep a spare or two around. If you only need one, please fill out our Single Coil form, and we'll see what we can do.
- 0.14Ω UN2-2 dual meshed-H, rated 80–90W
- It's the coil that comes in the box with the Uwell Valyrian 3 tank and the Valyrian 3 200W kit
- Two mesh strips spread the heat out evenly, and that gives you big, thick clouds on every direct-lung drag
- Valyrian 3 owners can also use Valyrian 2 coils if they want more power
- Sold by the pack, max 5 per order
What's in the Box
- 1 pack of Uwell Valyrian 3 UN2-2 0.14Ω dual mesh coils
- Sold by the pack, max 5 per order
Valyrian 3 Coil Specs & Features
| Spec | Uwell Valyrian 3 UN2-2 0.14Ω |
|---|---|
| Resistance | 0.14Ω |
| Wattage | 80–90W |
| Element | UN2-2 dual meshed-H |
| Draw | Direct lung (DTL) |
| Fits | Valyrian 3 tank and Valyrian 3 200W kit |
Valyrian 3 Coil Compatibility
The Valyrian 3 tank takes two families of coils. It takes its own Valyrian 3 coils, and it also takes the Valyrian 2 coils.
| Coil | Resistance | Wattage | Where to get it |
|---|---|---|---|
| Valyrian 3 UN2-2 Dual Mesh | 0.14Ω | 80–90W | This page |
| Valyrian 3 UN2 Single Mesh | 0.32Ω | 80–85W | Request it |
| Valyrian 2 UN2-3 Triple Mesh | 0.16Ω | 90–100W | Valyrian 2 coils |
| Valyrian 2 Quad Coil | 0.15Ω | 100–120W | Valyrian 2 coils |
Crown series coils won't fit the Valyrian 3.
Will It Work With My Tank?
- Uwell Valyrian 3 tank
- The tank in the Uwell Valyrian 3 200W kit
- Original Uwell Valyrian (first generation)
- Uwell Crown series tanks
- Non-Uwell tanks
If you have a Valyrian 2 or a Valyrian 2 Pro tank, you'll want our Uwell Valyrian 2 coils, and that lineup has a 0.14Ω dual mesh too.
Best Vape Juice for Valyrian 3 Coils
For this coil, we recommend our freebase vape juice, which is just the regular kind of nicotine, and we always like to suggest 3 to 6mg. VG, or vegetable glycerin, is the thick part of the juice that makes the vapor. With a coil like this one, MAX VG works best, and 50/50 usually does fine when you're running it at the lower end of its wattage. Nic salt is the smoother kind of nicotine that's made for low-power pod kits, and it's way too strong at 80W and up. Every bottle of Custom Blend Vape Juice gets mixed by hand after you order it. If you're not sure which flavor to get, our vape juice sampler pack lets you try five different flavors before you invest in a bigger bottle.
Custom Blend Tip: If your tank starts gurgling, try turning the wattage up toward 85W, and be careful not to overfill it. At 80W and up, this coil goes through juice pretty fast, so keep an eye on how much is left in the tank.
How to Change a Valyrian 3 Coil
- Pour out whatever juice is left in the tank, and then unscrew the base from the glass.
- Pull the old coil out of the base, and press the new one firmly into place.
- Prime it, which just means getting the cotton wet before you vape. Drip 3–4 drops of e-liquid down the center of the coil and onto the cotton you can see through the side holes.
- Put it back together, flip the top cap open and fill the tank. Then wait at least 10 minutes. The longer it soaks, the better.
- Start around 80W, take a few drags and then slowly work your way up until it tastes right to you.
Valyrian 3 Coils Reviews
- Vapor: of the two Valyrian 3 coils, the dual mesh is made for clouds, and the vapor comes out warm and thick.
- Power: it needs less wattage than the Valyrian 2 cloud coils, so it's a little easier on your batteries.
- Keep in mind: at 80W and up, you'll be refilling pretty often, but the 6ml tank helps with that.
Troubleshooting
- Gurgling or spitting: turn the wattage up toward 85W, and don't overfill the tank.
- Leaking from the airflow: check that the coil is pushed in all the way and that the O-rings (the little rubber seals) are in place.
- Harsh, burnt drag on a new coil: the cotton wasn't soaked all the way through. Let the next one prime longer, and start it at 80W.
- Burnt taste won't go away: it's time for a new coil. Most of them last 1–2 weeks, but it all depends on how much you use them.
Questions & Answers
What tanks do Valyrian 3 coils fit?
They fit the Uwell Valyrian 3 tank, and that includes the tank in the Valyrian 3 200W kit.
What wattage is the Valyrian 3 0.14 coil?
It's rated 80–90W. We recommend starting around 80W and working your way up from there.
Are Valyrian 2 coils compatible with Valyrian 3?
Yes. The Valyrian 3 tank takes Valyrian 2 coils, and those run hotter, at 90–120W.
Do Valyrian 3 coils fit the Valyrian 2 tank?
Some sellers list them as cross-compatible, but Uwell made these for the Valyrian 3. So if you have a Valyrian 2, we'd stick with Valyrian 2 coils.
Do you sell the Valyrian 3 0.32Ω coil?
Not right now. We carry the 0.14Ω. Please request the 0.32Ω, and we'll do our best.
Do Crown coils fit the Valyrian 3?
No. Crown series coils use a different fitting, so they won't work in this tank.
Can I use nic salts with this coil?
We certainly don't recommend it. At 80–90W, salt nicotine is way too harsh. For this coil, we always like to suggest freebase at 3 to 6mg, in 50/50 or MAX VG.
How long does a Valyrian 3 coil last?
Usually 1–2 weeks of daily use. You'll know when it's time, as it'll start putting out less vapor, and the flavor will be a little muted. Priming it well and using juice that isn't loaded with sugar both help it last longer.
For use by adults 21+.
| Compatible with | Uwell Valyrian 3 tank and the Valyrian 3 200W kit |
|---|---|
| Resistances | 0.14Ω UN2-2 Dual Meshed-H (80–90W) |
| Draw | Direct lung (DTL) |
| Not compatible with | Original Uwell Valyrian, Crown series and other Uwell tanks |
| Sold as | By the pack |
| Tip | Put a few drops of juice on the cotton of a new coil, and then wait at least 10 minutes before you fire it up. The longer, the better. |
See our Shipping Policy and Returns.
You May Also Like
Customer Reviews
We just relaunched our website, so our reviews got a fresh start too. Own one of these? We'd love for you to be one of the first to share your thoughts!




