
Uwell
Uwell Nunchaku Replacement Coils
$12.95
Uwell Nunchaku replacement coils in 0.2Ω UN2 Meshed-H, 0.25Ω and 0.4Ω Claptonized A1, sold by the pack. They fit the Nunchaku tank and the Nunchaku 80W kit.
- 0.2Ω mesh, 0.25Ω and 0.4Ω clapton heads
- Plug-and-pull, no threads
- Moderate 40–60W for single-battery mods
Step 1 of 1: choose Resistance to continue
Limit 5 per order. Need more? Request a larger quantity.
- Resistances
- 0.2Ω, 0.25Ω, 0.4Ω
- Wattage
- 40–60W
- Coil types
- Meshed-H & Claptonized A1
- Fitting
- Plug and pull
- Draw style
- Direct lung
- Sold as
- By the pack
Uwell Nunchaku Replacement Coils are the plug-and-pull coils for Uwell's Nunchaku sub-ohm tank, and that's the same tank that comes in the Nunchaku 80W kit. Sub-ohm just means the coil is under 1 ohm, and these are made for bigger clouds. Uwell Nunchaku coils come in two styles. The 0.2Ω UN2 Meshed-H is a mesh coil, and it makes the most vapor. The 0.25Ω and 0.4Ω Claptonized A1 coils use kanthal wire with a finer wire wrapped around it, and those are the ones for richer flavor. All three run at a very moderate 40–60W, and we sell them by the pack.
- Three Nunchaku coils: 0.2Ω UN2 Meshed-H, 0.25Ω and 0.4Ω Claptonized A1
- Plug-and-pull, so you just pull the old coil out and push a new one in, with no threads to strip
- They run at a moderate 40–60W, so a single-battery mod handles them just fine
- Fits the Uwell Nunchaku tank and the Nunchaku 80W kit, and they're also listed for the Nunchaku 2
- They won't fit the Uwell Crown, Valyrian or Caliburn lines
What You Get
- 1 pack of Uwell Nunchaku coils in the resistance that you pick
- Sold by the pack. If you only need one, please fill out our Single Coil form, and we'll see what we can do
- Coils only. The tank is sold separately
Uwell Nunchaku Coil Specs
| Spec | Uwell Nunchaku Coils |
|---|---|
| Resistances we stock | 0.2Ω UN2 Meshed-H, 0.25Ω and 0.4Ω Claptonized A1 |
| Wattage | 0.2Ω 50–60W · 0.25Ω 40–50W · 0.4Ω 45–55W |
| Heating element | FeCrAl mesh (0.2Ω); clapton-wrapped kanthal A1 wire (0.25Ω, 0.4Ω) |
| Fitting | Plug and pull, no threads |
| Fits | Uwell Nunchaku tank and Nunchaku kit (also listed for the Nunchaku 2) |
| Sold as | By the pack |
Nunchaku Coils: Resistance & Wattage
If you want the most flavor, we recommend the 0.4Ω. The 0.25Ω is a nice balance of flavor and vapor, and the 0.2Ω Meshed-H makes the biggest clouds. You might notice the 0.4Ω's wattage range is a little bit higher than the 0.25Ω's. That's just how Uwell rates them.
Will Nunchaku Coils Fit My Tank?
- Uwell Nunchaku sub-ohm tank
- Uwell Nunchaku 80W kit (the tank it ships with)
- Uwell Nunchaku 2 tank and kit (listed by major retailers; check your coil)
- Uwell Crown 5 and other Crown tanks
- Uwell Valyrian 3 and other Valyrian tanks
- Uwell Caliburn pods (see Caliburn G2 coils)
- Uwell Whirl tanks
- Other brands' tanks
Best Vape Juice for Nunchaku Coils
For Nunchaku coils, we always like to suggest freebase vape juice, which is just the regular kind of nicotine, at 3 to 6mg. VG, or vegetable glycerin, is the thick part of the juice that makes the vapor, and these coils do best with a thick, high-VG juice like our MAX VG. You can use 50/50 in the 0.4Ω, too, as long as you keep the power on the low side. Nic salt is the smoother kind of nicotine made for pod kits, and it's too strong at 40W and up. Every Custom Blend Vape Juice flavor comes in freebase, and we mix your bottle by hand once you order it. Our e-juice sample pack gets you five flavors to try before you invest in a bigger bottle.
Custom Blend Tip: The Nunchaku line is an older one, so some of the resistances come and go. Once you find the coil that you like, we recommend grabbing a spare pack while we have it.
How to Change & Prime a Nunchaku Coil
- Empty the tank and unscrew it from the mod, and then unscrew the base.
- Pull the old coil straight out of the base, and push the new one firmly in.
- Prime the new coil, which just means soaking the cotton before you vape. Drip 3–4 drops of e-liquid into the top and onto the cotton that you can see through the side holes.
- Put it back together and fill it up. Let the cotton soak for at least 10 minutes, and the longer, the better.
- Start at the low end of its wattage range, take a few drags and then slowly turn it up to where you like it. That gives a new coil a chance to break in.
Nunchaku Coils Reviews
- Flavor: the Claptonized A1 coils are made for full flavor without needing a lot of power.
- Vapor: the 0.2Ω Meshed-H heats up quickly and makes thick clouds.
- Ease: the plug-and-pull coils are very quick to swap.
- Keep in mind: the Nunchaku line is older, so some resistances come and go.
Nunchaku Coil Troubleshooting
- Burnt taste on a new coil: the cotton probably didn't soak long enough. Let the next one prime longer, and start it at the low end of the range.
- Leaking from the base: the coil isn't pushed in all the way, or the base isn't screwed on tight.
- Gurgling: that crackly, spitting sound means there's extra juice in the coil. Turn the wattage up a few watts, and try not to overfill the tank.
- Weak flavor: the coil is worn out. You'll know, as it'll start putting out less vapor, and the flavor will be a little muted. Most vapers change coils every 1–2 weeks, but it all depends on how much you use them.
Questions & Answers
What tanks do Uwell Nunchaku coils fit?
They fit the Uwell Nunchaku sub-ohm tank, and that includes the one that comes in the Nunchaku 80W kit. Major retailers also list them for the Nunchaku 2 tank and kit.
Which Nunchaku coil should I choose?
If you want flavor, we'd recommend the 0.4Ω Claptonized A1. The 0.25Ω Claptonized A1 is a good balance of flavor and vapor, and the 0.2Ω UN2 Meshed-H gives you the most vapor.
What wattage should I use for Nunchaku coils?
The 0.2Ω UN2 Meshed-H runs at 50–60W, the 0.25Ω at 40–50W and the 0.4Ω at 45–55W. Start at the low end and work your way up.
What is the UN2 Meshed-H coil?
It's Uwell's mesh coil. It uses a strip of FeCrAl mesh, a type of heating metal, and it heats up fast and evenly, so you get thick vapor. The Nunchaku version is 0.2Ω.
What does Claptonized A1 mean?
It means the heating wire is kanthal A1 with a finer wire wrapped around it, clapton style. That gives it more surface area, and that helps with flavor.
Do Nunchaku coils fit the Crown or Valyrian tanks?
No. Each Uwell tank line takes its own coils.
Can I use nicotine salt with Nunchaku coils?
We certainly don't recommend it. At 40–60W, salt nicotine would be way too much nicotine. We'd recommend freebase at 3 to 6mg, and MAX VG works best in these coils.
How long do Nunchaku coils last?
About 1–2 weeks of daily vaping, but it all depends on how much you use them. If you prime it well and use a juice that isn't loaded with sweetener, it'll last a little bit longer.
Do you sell the 0.14Ω Nunchaku coil?
Not right now. Please request it, and we'll do our best.
For use by adults 21+.
| Compatible with | Uwell Nunchaku tank and Nunchaku 80W kit; also listed for the Nunchaku 2 tank and kit |
|---|---|
| Resistances | 0.2Ω UN2 Meshed-H (50–60W), 0.25Ω Claptonized A1 (40–50W), 0.4Ω Claptonized A1 (45–55W) |
| Sold as | By the pack |
| Tip | Prime a new coil with a few drops of e-liquid and let it sit at least 10 minutes before firing. |
See our Shipping Policy and Returns.
You May Also Like
Customer Reviews
We just relaunched our website, so our reviews got a fresh start too. Own one of these? We'd love for you to be one of the first to share your thoughts!




