
Kangertech
Kanger T3S Coils (Kangertech T3S / MT3S Replacement Coils)
Sold out
Kangertech T3S replacement coils in 1.8Ω, 2.2Ω and 2.5Ω, sold by the pack. These are the screw-in bottom coils for the Kanger T3S and MT3S clearomizers.
- 1.8Ω, 2.2Ω and 2.5Ω resistances
- Fits the Kangertech T3S and MT3S
- Tight mouth-to-lung draw
Step 1 of 1: choose Resistance to continue
Limit 5 per order. Need more? Request a larger quantity.
Sold out:
Enter your email and we'll send you a single email as soon as it's back in stock. You won't be added to any mailing list. In a hurry? Ask us to order one in.
- Resistances
- 1.8Ω, 2.2Ω, 2.5Ω
- Fitting
- Screw-in bottom coil
- Fits
- T3S, MT3S
- Draw style
- Mouth to lung
- Device
- eGo-style pen batteries
- Sold as
- By the pack
Kanger T3S Coils are the small screw-in bottom coils for the Kangertech T3S and MT3S clearomizers. A clearomizer is a small, clear tank, and these are the classic ones that go on eGo-style pen batteries (the slim, pen-shaped kind). We carry the three common resistances, 1.8Ω, 2.2Ω and 2.5Ω, so you can match the coil that you already have. On a low-power pen battery, each one gives you a tight MTL (mouth-to-lung) draw. That means the vapor sits in your mouth for a second before it goes to your lungs, a lot like a cigarette. We sell these Kanger T3S replacement coils by the pack.
- Three resistances: 1.8Ω, 2.2Ω and 2.5Ω
- Fits the Kangertech T3S and MT3S clearomizers
- Screw-in bottom coil, so you just unscrew the base and swap the coil
- A tight mouth-to-lung draw on an eGo-style pen battery
- Sold by the pack, up to 5 per order
What's in the Box
- 1 pack of Kangertech T3S / MT3S coils in the resistance that you choose
- Limit of 5 per order
Kanger T3S Coil Specs & Features
| Resistance | Feel | Best for |
|---|---|---|
| 1.8Ω | Warmest, most vapor of the three | Variable-voltage pens and stronger batteries |
| 2.2Ω | Middle ground | Everyday use on most eGo-style pens |
| 2.5Ω | Coolest, gentlest | Fixed 3.7V batteries; longest battery life |
Which Resistance Should I Choose?
Some eGo batteries run at one fixed voltage, so there's no way to turn the power up or down. On those, a higher resistance runs cooler and gentler, and a lower one runs warmer and makes more vapor. If your pen has adjustable voltage, we recommend starting low, around 3.3–3.7V, and turning it up slowly. Just keep in mind that a lower-ohm coil like the 1.8Ω will burn out faster if you run it hot.
Will It Work With My Tank?
- Kangertech T3S clearomizer
- Kangertech MT3S clearomizer
- T3S-style clearomizers made for the same screw-in head
- Kanger Subtank, Toptank and Subvod (use Kanger SSOCC coils)
- Kanger EVOD and Protank heads
- Sub-ohm tanks
Best Vape Juice for T3S Coils
This little coil does best with a thinner juice, so when in doubt, 50/50 is usually a good bet here. Our freebase vape juice, which is the regular kind of nicotine, comes in 50/50, and for a tight draw like this one, we'd suggest somewhere from 6 to 18mg. We mix it by hand to the exact nicotine strength that you pick. Our nicotine salts, a smoother kind of nicotine, work great too. These coils came out before nic salt was even around, but at 1.8Ω and up, they run at low power, just like the high-ohm coils that nic salt is made for. If you're new to Custom Blend Vape Juice, start with a vape juice sampler pack. You get five flavors, so you can find one you love before you invest in a bigger bottle.
Custom Blend Tip: We recommend 50/50 juice or nic salts in these. High-VG juice is too thick for a coil this small, and it causes dry puffs (harsh, burnt-tasting drags). Sweet, dark juice wears the coil out faster, too.
How to Change a Kanger T3S Coil
- Empty the clearomizer, and unscrew it from the battery.
- Unscrew the base, and then unscrew the old coil from the base.
- Screw the new coil in finger-tight. Prime it with 2–3 drops of e-liquid right on the wick, which is the cotton inside the coil.
- Screw everything back together, fill the tank and wait at least 10 minutes. The longer, the better.
- Take a few gentle drags at a low voltage before you vape on it like normal.
Kanger T3S Coils Reviews
- Simple: it's an easy, low-cost coil that keeps a favorite old pen running.
- Draw: it's tight and close to a cigarette, and that's why a lot of MTL vapers still hang on to their T3S.
- Look out for: these small coils wear out faster with sweet, dark juice, so keep a spare or two around.
Troubleshooting
- Burnt taste: the voltage is too high, or the wick ran dry. Turn it down, and give the next coil a longer soak.
- Leaking from the base: the coil isn't screwed in snug, or the seal is worn out.
- Weak vapor: the battery is running low, or the coil is worn out.
- Time for a new coil: a burnt taste sticks around after you refill, or the juice in the tank looks dark.
Questions & Answers
What do Kanger T3S coils fit?
They fit the Kangertech T3S and MT3S clearomizers, plus any T3S-style clearomizer that's made for the same screw-in coil.
What resistances do you stock?
We carry 1.8Ω, 2.2Ω and 2.5Ω. If you need 1.5Ω, please request it, and we'll do our best.
Are T3S and MT3S coils the same?
Yes. The MT3S uses the same coil as the T3S, so these fit both.
Which T3S coil should I choose?
The 2.2Ω works well on most eGo-style pens. On a fixed-voltage battery, we'd go with the 2.5Ω for a cooler draw. If you want more warmth and vapor, go with the 1.8Ω.
Do T3S coils fit the Kanger Subtank or EVOD?
No. The Subtank family uses Kanger SSOCC coils, and the EVOD takes a different coil.
Can I use high-VG juice in a T3S?
Not really. Thick juice has a hard time soaking into a coil this small, and you'll get dry puffs. We'd recommend 50/50 or nic salts.
How long does a T3S coil last?
Usually 1–2 weeks of daily use, but it all depends on how much you vape. You'll know when to change it, as it'll start putting out less vapor, and the flavor will be a little muted. A lighter, less sweet juice helps it last longer.
Do you sell T3S coils in 5-packs?
They come by the pack. If you only need one, please fill out our Single Coil form, and we'll see what we can do. Need more than 5? Please request a larger quantity, and we'll do our best.
For use by adults 21+.
| Compatible with | Kangertech T3S and MT3S clearomizers (and T3S-style clearomizers built for the same head) |
|---|---|
| Resistances | 1.8Ω, 2.2Ω, 2.5Ω |
| Fitting | Threaded bottom coil (screws into the clearomizer base) |
| Draw style | Mouth to lung (MTL) |
| Not compatible with | Kanger SSOCC / Subtank, EVOD and Protank heads; sub-ohm (coils under 1 ohm, for bigger clouds) tanks |
| Sold as | By the pack |
| Tip | Drip a few drops of e-liquid on a new coil, and let it sit for at least 10 minutes before you vape on it. The longer, the better. |
See our Shipping Policy and Returns.
You May Also Like
Customer Reviews
We just relaunched our website, so our reviews got a fresh start too. Own one of these? We'd love for you to be one of the first to share your thoughts!




