
HorizonTech
HorizonTech Falcon Coils (Falcon 2 Sector Mesh & Falcon Triple Mesh)
From $10.95
HorizonTech Falcon coils, sold by the pack: the 0.14Ω Falcon 2 Sector Mesh (70–75W) for the Falcon II, and the 0.15Ω M-Triple Mesh (80–85W) for the original Falcon, the Falcon King and the Falcon Legend.
- Falcon 2 Sector Mesh 0.14Ω, 70–75W
- M-Triple 0.15Ω for the Falcon King & Legend
- Wood-pulp and cotton wick
Step 1 of 1: choose Resistance to continue
Limit 5 per order. Need more? Request a larger quantity.
- Resistances
- 0.14Ω, 0.15Ω
- Wattage
- 70–85W
- Coil type
- Sector mesh, triple mesh
- Wick
- Wood pulp + cotton
- Draw style
- Direct lung
- Sold as
- By the pack
HorizonTech Falcon Coils come in two families, and we stock the one from each family that most people need. The Falcon 2 Sector Mesh 0.14Ω is the push-in coil for the Falcon II tank. It's rated 70–75W, and its cone-shaped mesh sends the vapor straight up the middle of the tank, so the flavor comes through strong. The Falcon M-Triple Mesh 0.15Ω is the cloud coil for the original Falcon, the Falcon King and the Falcon Legend, and it's rated 80–85W. Both of them use Horizon's wood-pulp and cotton wick, which is the part of the coil that soaks up your juice. These are sub-ohm coils, which means they're under 1 ohm and made for bigger clouds. We sell both of them by the pack.
- Falcon 2 Sector Mesh 0.14Ω (70–75W) for the HorizonTech Falcon 2 tank
- Falcon M-Triple Mesh 0.15Ω (80–85W) for the original Falcon, Falcon King and Falcon Legend
- The wood-pulp and cotton wick soaks up thick, high-VG (vegetable glycerin, for vapor) juice very quickly
- Falcon 2 coils simply push in, so there are no threads to strip
- Sold by the pack, up to 5 per order
What's in the Box
- 1 pack of HorizonTech Falcon coils: Falcon 2 Sector Mesh 0.14Ω or Falcon M-Triple Mesh 0.15Ω
- Sold by the pack, up to 5 per order
Horizon Falcon Coil Specs & Features
| Spec | Falcon 2 Sector Mesh | Falcon M-Triple Mesh |
|---|---|---|
| Resistance | 0.14Ω | 0.15Ω |
| Wattage | 70–75W | 80–85W |
| Element | Cone-shaped sector mesh | Triple mesh |
| Wick | Wood pulp + cotton | Wood pulp + cotton |
| Fitting | Push-in | Screw-in (original Falcon style) |
| Fits | Falcon 2 (Falcon II) | Original Falcon, Falcon King, Falcon Legend |
Falcon 2 Coils vs Original Falcon Coils
When HorizonTech made the Falcon II, it changed the coil. Falcon 2 coils are push-in Sector Mesh coils, and the original Falcon line (the F series, M series and M-Triple) uses a different body. So go by the tank that you have when you pick your coil, because the resistance alone won't tell you which one fits.
Which Falcon Coil Fits My Tank?
| Tank | Coil to buy |
|---|---|
| HorizonTech Falcon 2 (Falcon II) | Falcon 2 Sector Mesh 0.14Ω |
| Original HorizonTech Falcon (incl. Resin and Artisan editions) | Falcon M-Triple Mesh 0.15Ω |
| HorizonTech Falcon King | Falcon M-Triple Mesh 0.15Ω |
| HorizonTech Falcon Legend | Falcon M-Triple Mesh 0.15Ω |
Not sure which tank you have? Take a look at the top cap and the base. The Falcon 2 has a push-button sliding top cap, and it says Falcon II on the base.
Will It Work With My Tank?
- HorizonTech Falcon 2 tank: Sector Mesh
- Original Falcon, Falcon Resin and Artisan editions: M-Triple
- Falcon King: M-Triple
- Falcon Legend: M-Triple
- Horizon Arctic tanks (different coils)
- Pod systems and vape pens
- Non-Horizon tanks
Custom Blend Tip: Please check your tank before you order. If it has the push-button sliding top cap and it says Falcon II on the base, you want the Sector Mesh. The original Falcon, the Falcon King and the Falcon Legend all take the M-Triple.
Best Vape Juice for Falcon Coils
These are direct-lung coils, which means the vapor goes straight to your lungs. We recommend our freebase vape juice, the regular kind of nicotine, at 3 to 6mg, and most people use MAX VG with coils like these. 50/50 works too, but you'll get a little more throat hit (the catch you feel in your throat), and thin juice tends to leak more in a Falcon tank. Nic salt, the smoother kind of nicotine, is made for low-power pod kits, and we certainly don't recommend it here. We mix every bottle of Custom Blend Vape Juice by hand once your order comes in, and our e-juice sample pack gets you five different flavors to try first.
How to Change a Falcon Coil
- Empty the tank, and then unscrew the base.
- On a Falcon 2, pull the old Sector Mesh coil straight out and press the new one in. On the original Falcon, King or Legend, unscrew the old coil and screw the new one in finger-tight.
- Prime the new coil. Drip 3–4 drops of juice into the top of it and onto the cotton you can see through the side holes.
- Put it back together, fill the tank and let it sit for at least 10 minutes. Wood-pulp wicks soak up juice fast, but we recommend waiting longer. The longer, the better.
- Start around 50W on the Sector Mesh or 75W on the M-Triple. Take a few drags, and then slowly work your way up to where you normally vape it. Breaking it in like that helps the coil last longer.
Horizon Falcon Coils Reviews
- Flavor: this is what people like most about these coils. The Sector Mesh gives you very rich flavor at 70–75W.
- Coil life: a lot of owners say the wood-pulp wick lasts longer than a plain cotton wick.
- Break-in: go easy on a fresh Falcon 2 coil. It needs a short break-in period below 75W before you run it at full power.
- Look out for: make sure you buy the right family, because Falcon 2 coils and original Falcon coils won't swap.
Troubleshooting
- Leaking: make sure the coil is pushed in all the way and that the O-rings (the rubber seals) are in place and don't have any nicks. Thin 50/50 juice leaks more than thick, high-VG juice.
- Gurgling: turn the wattage up a little, and then take a few gentle draws without pressing the fire button.
- Burnt taste on a fresh coil: the cotton wasn't fully primed. Let the next one soak longer, and start it at a lower wattage.
- Time for a new coil: you'll know when to change it. The flavor gets a little muted, or a burnt taste hangs around after you refill. Dark, sticky gunk on the wick is another sign.
Questions & Answers
What coils does the Falcon 2 tank use?
It uses the HorizonTech Falcon 2 Sector Mesh 0.14Ω, which is rated 70–75W. Original Falcon coils won't fit it.
Do Falcon 2 coils fit the original Falcon?
No. The Falcon 2 Sector Mesh only fits the Falcon II. Original Falcon tanks need original Falcon coils, like the M-Triple.
What tanks does the Falcon M-Triple Mesh fit?
The original HorizonTech Falcon (including the Resin and Artisan editions), the Falcon King and the Falcon Legend.
Do Falcon King coils fit the Falcon 2?
No. The Falcon King takes original Falcon coils, and the Falcon 2 only takes Sector Mesh coils.
What wattage should I use for Horizon Falcon coils?
70–75W for the 0.14Ω Sector Mesh and 80–85W for the 0.15Ω M-Triple. On a new coil, start a little lower and work your way up.
What wick do Falcon coils use?
A blend of wood pulp and cotton. It soaks up thick juice very fast.
Can I use nic salts with Falcon coils?
No, we wouldn't. Nic salt is made for lower-wattage pod systems, and it's way too harsh at these wattages. For these coils, we always like to suggest freebase at 3 to 6mg, in MAX VG or 50/50.
How long does a Falcon coil last?
It all depends on how much you use it, but usually 1–2 weeks of daily use, and often longer if your juice isn't overly sweetened.
Do you sell other Falcon coils?
Right now we stock the Sector Mesh and the M-Triple. If you're looking for the F series, M1 or M2 coils, please fill out our Request a Product form, and we'll do our best.
For use by adults 21+.
| Compatible with | Falcon 2 Sector Mesh: HorizonTech Falcon 2 (Falcon II) tank. M-Triple Mesh: original Falcon (incl. Resin and Artisan editions), Falcon King and Falcon Legend |
|---|---|
| Resistances | Falcon 2 Sector Mesh 0.14Ω (70–75W); Falcon M-Triple Mesh 0.15Ω (80–85W) |
| Wick | Wood pulp and cotton blend |
| Not compatible with | The two families don't swap: Falcon 2 coils don't fit original Falcon tanks, and original Falcon coils don't fit the Falcon 2 |
| Sold as | By the pack |
| Tip | Drip a few drops of juice on a new coil, and give it at least 10 minutes to soak before you vape. The longer, the better. |
See our Shipping Policy and Returns.
You May Also Like
Customer Reviews
We just relaunched our website, so our reviews got a fresh start too. Own one of these? We'd love for you to be one of the first to share your thoughts!




