
GeekVape
GeekVape S Series Coils (Obelisk C Tank Coils)
Sold out
The GeekVape S series 0.25Ω dual coil (45–55W), sold by the pack. It's the replacement coil for the GeekVape Obelisk C tank.
- S0.25Ω dual coil, rated 45–55W
- Made for the GeekVape Obelisk C tank
- Easy on single-battery mods
Limit 5 per order. Need more? Request a larger quantity.
Sold out:
Enter your email and we'll send you a single email as soon as it's back in stock. You won't be added to any mailing list. In a hurry? Ask us to order one in.
- Resistance
- 0.25Ω
- Wattage
- 45–55W
- Coil type
- Dual coil
- Fitting
- Push-in
- Draw style
- Direct lung
- Sold as
- By the pack
GeekVape S Series Coils are the replacement coils for GeekVape's Obelisk C sub-ohm tank. Sub-ohm means the coil is under 1 ohm, and it's built for bigger clouds. The S0.25Ω is the dual coil that the tank ships with. It has two heating coils inside, and it runs at 45–55W, so it makes warm, thick vapor without needing a big, powerful mod. The S series is its own coil family, so please check that your tank is the Obelisk C before you order. We sell the GeekVape S coil by the pack.
- S0.25Ω dual coil rated 45–55W
- The coil that the GeekVape Obelisk C tank ships with
- Push-in fitting, no threads
- It runs at moderate power, so most single-battery mods handle it fine
- Not the same as GeekVape Z, Super Mesh or Boost coils
What's in the Box
- 1 pack of GeekVape S series S0.25Ω dual coils
- Made for the GeekVape Obelisk C tank
- Coils only. The tank is sold separately
GeekVape S Series Coil Specs
| Spec | GeekVape S Series S0.25Ω |
|---|---|
| Resistance | 0.25Ω |
| Wattage | 45–55W |
| Build | Dual coil (kanthal) |
| Fitting | Push-in, no threads |
| Fits | GeekVape Obelisk C tank |
| Sold as | By the pack |
S0.25Ω Coil: Wattage
The S0.25Ω is a direct-lung coil, which means the vapor goes straight to your lungs. It runs at fairly low power for a sub-ohm coil. We recommend starting at 45W and raising it a couple of watts at a time, and then stop once the vapor is warm but not harsh.
GeekVape also makes an S0.15Ω (80–90W). We don't carry it right now, but please request it, and we'll do our best.
Will the S Series Coil Fit My Tank?
- GeekVape Obelisk C tank
- GeekVape Zeus, Z Fli, Obelisk Sub-Ohm and P Sub-Ohm tanks take Z series coils
- GeekVape Cerberus, Aero and Shield tanks use Super Mesh coils
- Aegis Boost and Hero pods need Boost Mesh coils
- Obelisk 120 FC and Obelisk 200 kits (they ship with Z coils)
The tank's name is printed on its base or on the box. Still not sure? Please ask us before you order.
Best Vape Juice for S Series Coils
For the S0.25Ω, we recommend freebase, the regular kind of nicotine, and we always like to suggest 3 to 6mg. MAX VG works best at 45–55W. Since it runs at a fairly low wattage, 50/50 is usually fine too, and it gives you more throat hit (the kick you feel in the back of your throat). Every bottle of our freebase vape juice is mixed by hand when you order it, and you pick your PG/VG ratio. PG, or propylene glycol, carries the flavor, and VG, or vegetable glycerin, makes the vapor. If you'd like to sample a few flavors first, grab a vape juice sampler pack with five of them.
Custom Blend Tip: Some places mix up the S, Z and Super Mesh names, so match the letter on your old coil before you order. Start a fresh S0.25Ω at 45W, take a few drags and then work your way up.
How to Change & Prime an S Coil
- Empty the tank and unscrew it from the mod, and then unscrew the base.
- Pull out the old coil, and press the new S0.25Ω in firmly.
- Prime it with 3–4 drops of e-liquid. Drip them into the top of the coil and onto the cotton that's showing through the side holes.
- Screw it all back together and fill the tank. Then let it soak for at least 10 minutes. The longer, the better.
- Start at 45W, take a few drags and then work your way up from there.
S Series Coils Reviews
- Flavor: it tastes warm and full, and you don't need a lot of power to get it.
- Battery: at 45–55W, it's very easy on single-battery mods.
- Keep in mind: it's easy to order the wrong letter, and the S series only fits the Obelisk C.
S Coil Troubleshooting
- Burnt taste on a new coil: let it prime longer, and start at 45W.
- Gurgling: turn the wattage up a few watts, and don't overfill the tank.
- Leaking from the base: the coil isn't pushed all the way in, or an O-ring isn't sitting right. Check the O-rings (the little rubber seals) for nicks, too.
- Weak flavor: the coil is worn out. When the vapor thins out and the flavor gets a little muted, it's time for a new one. Most vapers change sub-ohm coils every 1–2 weeks.
Questions & Answers
What tank do GeekVape S series coils fit?
The GeekVape Obelisk C tank. The S series has its own fitting, so other GeekVape tanks need Z, Super Mesh or Boost coils.
What wattage is the GeekVape S coil 0.25?
GeekVape rates the S0.25Ω dual coil at 45–55W.
Are S series coils the same as Super Mesh coils?
No. Super Mesh coils fit the Cerberus, Aero and Shield tanks, and S series coils fit the Obelisk C. Some places list them together, so please check the letter on your coil.
Do S series coils fit the Obelisk 120 FC or Obelisk 200?
No. Those kits come with the Obelisk Sub-Ohm tank, and that tank takes Z series coils.
Do you sell the S0.15 coil?
Not right now. Please request the GeekVape S0.15 coil, and we'll do our best.
Can I use nicotine salt with the S0.25 coil?
We don't recommend it. Nic salt is the smoother nicotine made for pod systems, and at 45–55W it would be way too much nicotine. We'd go with freebase at 3 to 6mg, in 50/50 or MAX VG.
How long does a GeekVape S coil last?
Usually 1–2 weeks of daily use. It really depends on how much you vape and how sweet your e-liquid is.
How do I prime a new S coil?
Drip a few drops of e-liquid onto the cotton, and then fill the tank. Let it sit for at least 10 minutes. The longer, the better. Then start at 45W and slowly work your way up.
For use by adults 21+.
| Compatible with | GeekVape Obelisk C tank |
|---|---|
| Resistances | S0.25Ω Dual Coil (45–55W) |
| Sold as | By the pack |
| Tip | Give a fresh coil a few drops of e-liquid and at least 10 minutes to soak before the first drag. |
See our Shipping Policy and Returns.
You May Also Like
Customer Reviews
We just relaunched our website, so our reviews got a fresh start too. Own one of these? We'd love for you to be one of the first to share your thoughts!




