
GeekVape
GeekVape M Series Replacement Coils
$12.95
GeekVape M Series mesh coils from 0.14Ω to 0.3Ω, for the Z Max tank. Sold in a 5-pack.
- Four mesh coils, 55–100W
- Made for the GeekVape Z Max tank
- 5 coils in the pack
Step 1 of 1: choose Resistance to continue
Limit 5 per order. Need more? Request a larger quantity.
- Resistances
- 0.14Ω, 0.15Ω, 0.2Ω, 0.3Ω
- Wattage
- 55–100W
- Coil type
- Mesh
- Draw style
- Direct lung
- Sold as
- 5-pack
GeekVape M Series Replacement Coils are made for one tank, the GeekVape Z Max. They're low-resistance mesh coils for cloud chasers, the folks who love big, thick clouds.
The Z Max comes with a 0.14Ω and a 0.2Ω in the box. We also stock the 0.3Ω dual mesh, which runs at the lowest power of the bunch, and the 0.15Ω Quadra, which runs at the highest.
- 0.3Ω Dual Mesh runs at the lowest power, 55–65W
- 0.15Ω Quadra Mesh runs at the highest, 85–100W
- Fits the Z Max tank, and the Z Max in the L200 Classic kit
- Won't fit GeekVape's other tanks
- 5 coils per pack
Resistance & Wattage
All four are mesh coils for direct-lung vaping, the wide-open draw that goes straight to your lungs. More mesh usually means more power and more juice.
Will M Series Coils Fit My Tank?
- GeekVape Z Max tank
- GeekVape L200 Classic kit (the Z Max tank it comes with)
- GeekVape Zeus (Z) Sub-Ohm tanks, which take Z Series coils
- GeekVape Cerberus, Aero and Shield tanks, which take Super Mesh coils
- Other brands' tanks
Best Vape Juice for M Series Coils
This kind of coil wants thick juice and low nicotine. That means MAX VG and freebase, the regular kind of nicotine, around 3 to 6mg. You can use 50/50 at the low end of the wattage, and you'll get more throat hit, the catch you feel in your throat.
Every bottle of our freebase vape juice is mixed by hand when you order it, and you pick the PG (propylene glycol, carries flavor) / VG ratio. Not sure on a flavor? Our 5 flavor sample pack lets you try five before you invest in a bigger bottle.
Custom Blend Tip: The Z Max comes with the 0.14Ω and 0.2Ω, so you may already know what those feel like. The Quadra wants a lot of power, so make sure your mod and batteries can handle 85W and up.
Prime It Before You Vape
- Empty the tank and take the base off. Keep it over a flat surface so you don't lose an O-ring.
- Out with the old coil. A Q-tip can also be helpful for wiping out the base.
- Give the new coil a few drops of juice on the cotton, so it isn't dry when you fill the tank.
- Seat it, close the tank and fill it, then leave it off the mod for at least 10 minutes. The longer, the better.
- Your first drags should be at the bottom of the wattage range. Work up slowly, and the coil will last longer.
When to Change Your Coil
- Flavor gets dull, or there's less vapor than last week
- Harsh or burnt puffs
- Dark gunk on the coil, which is mostly sweetener from the juice
- How long one lasts depends on how much you vape and what you vape
Questions & Answers
What tanks do GeekVape M Series coils fit?
The Z Max tank. GeekVape says M Series coils don't work in its other tanks.
Which M Series coil makes the most vapor?
The 0.15Ω Quadra Mesh, at 85 to 100 watts. It also goes through the most juice and battery.
Are M Series coils the same as Z Series coils?
No. Z Series coils fit the Zeus Sub-Ohm tanks, and M Series coils fit the Z Max. The names are close, so please check your tank.
For use by adults 21+.
| Compatible with | the GeekVape Z Max tank, including the one in the L200 Classic kit |
|---|---|
| Resistances | 0.14Ω Mesh (60–80W), 0.15Ω Quadra Mesh (85–100W), 0.2Ω Triple Mesh (70–85W), 0.3Ω Dual Mesh (55–65W) |
| Sold as | By the pack |
See our Shipping Policy and Returns.
You May Also Like
Customer Reviews
We just relaunched our website, so our reviews got a fresh start too. Own one of these? We'd love for you to be one of the first to share your thoughts!




